Qware MIAMIQW GMH-7000 Kurzanleitung

Package Content
. Headset stand x 1pc
. USB to USB cable x 1pc
. Manual x 1pc
Setup Step
1. Remove headset stand from packaging.
2. Find included USB cable and insert it into the back of the headset stand
(input). Plug the other end into your USB port on your computer.
3. You now will see the RGB lights lit up.
4. You now are able to plug in other USB connections, your headphones, and
a microphone into their respected jacks.
RGB Lights
. You will find the dedicated RGB button as the left of the two center buttons in
the front of the headset stand.
. Press it to change the RGB settings as there are 12 different modes.
. Hold down the RGB button for 4 seconds to turn off or on the lights while still
using the headset.
EQ Modes
. You will find the dedicated EQ button as the right of the two center buttons in
the front of the headset stand.
. There are 3 EQ modes. When you press the EQ button the lighting logo
located directly below the RGB and EQ button will change colors.
1. Red is HIFI mode
2. Green is gaming 3D mode
3. Blue is Cinema mode
. Test out which modes you like for different listening experiences.
*Please note: If your headphones use a USB cable instead of 3.5mm then you
will not haveaccess to the EQ function.
System Requirement
. Works with Win2000, Win XP, Win ME, Vista, Win7, Win8, WIN10, Linux and
Mac OS
80g双胶纸，双面印刷，尺寸80*115mm
MIAMI HEADPHONE GAMING STATION
QW GMH-7000
Preview:
RGB LED light
Light switch
3.5mm jack
EQ mode switch
(audio & mic)
3.5mm jack
Lighting logo
(mic)
(mode indicator)
Specifications
. Size: 156mm x 161mm x 261mm
. Weight: 408.5g
. RGB light: 12 modes
. EQ: 3 modes
. Port: 3 USB 2.0
. Power cable length: 1.5M
. Heavy iron inside
. Foot pad: Silicone
. Sound card chipset: SSS1630
. Max input voltage/current: DC 5V/2A
. Max output voltage/current: DC 5V/1.5A
. Mic gain amp: -7dB～39dB
. Sound card: audio codec 24bit/96KHZ
. Total harmonic distortion: 1KHZ@-3dB;3232Ω/load/72dB
. 3.5mm jack max output current: Condition/RL=16Ω/24mW/32Ω/12mW
USB 2.0
USB 2.0 Input