janitza ECS1-80 Betriebsanleitung

ECS1-80
Single-phase Digital Energy meters - Direct connection 80 A
• This family of devices provides a set of single phase energy meters designed to be directly connected to system where high current is required. All the meters are equipped with an easy
to read LCD with green back light on which displays all the active and reactive energy counters, with a red light LED which blink in proportion to the measured active energy and with a
optocoupler that allows the storage of energy on two different tariffs. Depending on the model a insulated M-Bus communication interface or a insulated Modbus communication
interface are built in two solid state relay which generate pulses proportional to the measured energy. Both M-Bus and Modbus communication interfaces offers a set of 15 measures.
1 2 3 4 5 6
L1 L1 N
54
MID calibrated
ECSEM119MID - ECSEM121MID
ECSEM123MID
A) Device code and certification data indications
B) Safety-sealing between upper and
lower housing part
Installation and Operating Instructions
active and reactive energy-meter with measurement of active and reactive instantaneous power - 2 tariff - 2 S0
Code Model
ECSEM118 ECS1-80
ECSEM119MID ECS1-80 MID
active and reactive energy-meter with measurement of active and reactive instantaneous power, and inbuilt communication M-Bus - 2 tariff
Code Model
ECSEM122 ECS1-80 M-Bus
ECSEM123MID ECS1-80 MID M-Bus
active and reactive energy-meter with measurement of active and reactive instantaneous power, and inbuilt communication Modbus RTU - 2 tariff
Code Model
ECSEM120 ECS1-80 Modbus
ECSEM121MID ECS1-80 MID Modbus
Installation must be carried out and inspected by a specialist or under his supervision.
When working on the instrument, switch off the mains voltage!
1000 imp/kWh
Dimension
90
45
44
6
64
A
A
B
Description
single-phase digital active and reactive energy-meter with active and reactice power indication
direct connection 0.25-5 (80) A - 2 tariffs - 2 S0
d.to with MID certified
Description
single-phase digital active and reactive energy-meter with active and reactice power indication
direct connection 0.25-5 (80) A - 2 tariffs - 2 S0 - and inbuilt communication M-Bus
d.to with MID certified
Description
single-phase digital active and reactive energy-meter with active and reactice power indication
direct connection 0.25-5 (80) A - 2 tariffs - 2 S0 - and inbuilt communication Modbus RTU
d.to with MID certified
WARNING
Display
• Energy value
• kWh / kvarh display
• Running tarif, called tarif
• Energy export (absorbed )
• Energy import (supplied )
• Displays inductive, reactive
power
• Displays capacitative, reactive
power
• Full scale current indication
• Consumption Bar display
(percentage of Pmax)
• Precision control LED
Cable stripping length and max. terminal screw torque
80 A direct connection main terminals - Screw driver PZ2
Tariff and communication terminals
Screw driver blade 0.8x3.5 mm
• Measuring elements
• Reversal preventing device
• Protected by double insulation
- 1 / 12 -
"ECS1-80"
IIST063-01
Commands
• Parameters set
• Menu key for reading
selection
Sealable terminal covers
Symbols
Stand 10-09-2012
2 Nm
15.5
0.8 Nm
9