Werbung
Installation
1 Insert the Hanging Mount Adaptor to 1.5" PF screw-thread (female) pipe or
to the Wall/Ceiling/Parapet Mount Adaptor (SBP-300WMW or
300WMW1/300CMW/300LMW) and turn it clockwise to secure to the Pipe
or Adaptor.
J
`
Make sure you fix the Pipe or Adaptor so that it reaches to the end of the
1.5" PF screw thread on the Hanging Mount Adaptor. If not secured tightly,
the Hanging Mount Adaptor may loosen from the Pipe or Adaptor, causing
physical damage or malfunction.
(Make sure you check the connection between two components before
proceeding with the next step.)
2 Install the camera onto the Hanging Mount Adaptor.
`
Make sure you insert the camera in the right direction.
PT01-005590A
Werbung
