Inhaltsverzeichnis
Werbung
17.
EU-Konformitätserklärung
Der Hersteller:
Produktbezeichnung:
Typenbezeichnung:
Seriennummer
Ab Baujahr:
The object of the declaration defined above complies with the requirements set out in the following articles of
Appendix I of the Machinery Directive 2006/42/EC: Articles 1.1.2, 1.1.5, Article 1.5.1 (by fulfilling the require-
ments of the Low Voltage Directive 2014/35/EU), and Article 1.5.11 (by fulfilling, due to its inherently benign
design, the requirements of EMC Directive 2014/30/EU with regard to emission and immunity to electromag-
netic levels). Additional safety measures are still necessary to protect against risks arising from moving
parts as per Article 1.3.8. Therefore the manufacturer of machinery or equipment where the fan is incorpora-
ted into or assembled is responsible for compliance with Article 1.3.8 and 1.4.1. Compliance with EN ISO 13857
refers to guards and protective devices when supplied, and installed, with the product.
It must not be put into service until the machine in which it is incorporated has been declared in conformity
with the all requirements of the Machinery Directive 2006/42/EC according with Annex II-1 part B.
It is also in conformity with the relevant Union harmonization legislation: Commission Regulation (EU) No
327/2011 implementing Directive 2009/125/EC with regard to eco-design requirements for fans driven by
motors with an electric input power between 125 W and 500 kW and RoHS Directive 2011/65/EU.
The following harmonized standards and technical specifications have been applied:
We are committed to provide relevant information on this product in response to a reasonable request by
national authorities.
The Technical Director is the person authorized to compile the technical file in accordance with Annex VII
part B.
Ort:
Gelsenkirchen
Datum:
01.012.2021
Maximilian Girnus
Geschäftsführer WALPOL GmbH
Walpol GmbH
Benzstr. 13
45891 Gelsenkirchen
LOW PRESSURE
CENTRIFUGAL FANS
DM, DM-A, CBM
All Manufactured
2005
EN 60204-1:2006 +
AC:2010
EN 62311:2008
EN ISO 12100:2010
EN ISO 12499:2008
EN ISO 13857:2008
17
Werbung
Inhaltsverzeichnis
Fehlerbehebung
