Controls and strap attachment / Bedienelemente und Armbandbefestigung
The watch is equipped with two buttons on the side for
basic easy operation. The display of the watch is fully
touchable, with its help other functions of the watch are
controlled.
The watch strap can be easily removed using the lever
located on each of the axles on the underside of the
strap (3). Push the lever and the spindle will be released.
Put the watch on your wrist so that the back side with the
heart rate sensor fits snugly against the surface of your
hand.
Charge the watch before using it for the first time. For
charging, the enclosed magnetic adapter (5) is used,
which is applied to the back of the watch (6) with its
entire surface.
The magnets attach the adapter tip in the correct
position. Plug the other end of the adapter into a suitable
USB socket.
The battery charge status is shown on the display.
Removing the strap / Armband entfernen
Wearing the watch properly / Die Uhr richtig tragen
Charging / Aufladen
Die Uhr ist mit zwei Knöpfen an der Seite für eine einfache
Bedienung ausgestattet. Das Display der Uhr ist vollständig
berührbar, mit dessen Hilfe andere Funktionen der Uhr gesteuert
werden.
Das Armband kann einfach mit dem Hebel an jeder der Achsen
an der Unterseite des Armbands (3) entfernt werden. Drücken
Sie den Hebel und die Spindel wird freigegeben.
Legen Sie die Uhr so an Ihr Handgelenk, dass die Rückseite mit
dem Herzfrequenzsensor genau an der Oberfläche Ihrer Hand
anliegt.
Laden Sie die Uhr auf, bevor Sie sie zum ersten Mal verwenden.
Zum Laden wird der beiliegende Magnetadapter (5) verwendet,
der mit seiner gesamten Oberfläche auf der Rückseite der Uhr
(6) angebracht ist.
Die Magnete befestigen die Adapterspitze in der richtigen
Position. Stecken Sie das andere Ende des Adapters in eine
geeignete USB-Buchse.
Der Ladezustand des Akkus wird im Display angezeigt.