Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB
Note: In programme mode 5 and 6, first enter time segments 1-6
for the first part of the week and then time segments 1-6 for the rest
of the week.
Note: If no entry is made after 10 seconds, the values are automa-
tically saved.
Switching programme automatic/manual
On the thermostat, briefly touch the button
display and press the button
again to switch the mode. The automatic
programme is active when the symbol
number next to it stands for the currently valid time segment (1-6).
Absence mode
The thermostat has an absence mode that you can activate to set a
specific temperature for several days, which is reset after the days have
elapsed. Use this function to save energy when you are not at home.
1. On the thermostat, briefly touch the button
display and press and hold the button again for approx. 6 seconds to
enter the settings menu.
2. Select the menu item
with the
Confirm the selection by pressing the
3. First select the desired temperature to be set during the absence and
then the length in days and confirm the entry. The absence mode is
active as soon as the symbol
The absence mode can be switched off prematurely by pressing the
button
once when the display is activated.
Display of temperature and valve position
When the display is active, the actual temperature and the position of
the valve are shown alternately.
off),
stands for 50% open and
target temperature is displayed by pressing the
displayed next to the temperature.
25
once to activate the
appears in the display. The
once to activate the
button. The symbol
flashes.
button once.
lights up permanently in the display.
stands for a closed valve (heating
stands for an open valve. The set
or
key.
is also
Key lock
To protect the thermostat from unintentional settings, the thermostat is
equipped with a key lock.
To activate/deactivate, briefly touch the button
tat to activate the display, press the button
tely press and hold the button
active when the
symbol appears in the display.
Boost mode
The thermostat has a boost function that you can use to heat a room as
quickly as possible. The valve is completely opened for a certain time.
By default, this is 5 minutes.
To activate it, briefly touch the button
activate the display, press the button
press and hold the button
for approx. 6 seconds. The boost mode
is active when the
symbol appears in the display. To deactivate the
function, press any key.
Window open detection
If a window is opened near the thermostat and the temperature drops
to the set temperature, the thermostat automatically closes the valve to
save energy and the display shows
position after a certain time.
Control via FontaHome
Once the thermostat has been added to the app, you can access it by
clicking on the name or icon in the device overview on „My Home".
Here you can view the current ambient temperature, target temperature
and history, as well as make settings and set frost protection and away
mode.
once on the thermos-
once and then immedia-
for approx. 6 seconds. The key lock is
once on the thermostat to
once and then immediately
. The valve returns to the original
GB
26
Werbung
Inhaltsverzeichnis
