Werbung
Verfügbare Sprachen
Verfügbare Sprachen
User Manual
Assemble Introduction
(The size will be according to regular measurements )
1
2
Pressing the caster into the base.
Insert the gaslift to the base.
4
5
Fix the mechanism to the seat cushion
Fix the back plate to the seat cushion
with 4pcs small shim and 4pcs
with 3pcs big shim and 3pcs
(M6*20) screws.
7
SIHOO
Insert the headrest into the slot.
1.One chair can only bear one person's weight;
Pls read the Safety
2.Please use on the flat floor;
Instructions below
3.Please don't let the child sit on the chair alone if he is under 5 year-old;
carefully.
4.Please don't sit on the armrest, in case cause some danger;
5.Do not stand on the chair or use it as a ladder or footsteps;
6.Please don't put overweight on the chair, or used as trolley;
7.Don't use sharp or hooked objects to scrape the chair and do not get it close to the fire;
8.To avoid any harm to your fingers, don't insert them into the mechanism while sitting.
3
Front side
Fix the armrest to the seat cushion
with 6pcs small shim and 6pcs
(M6*25) screws.
6
Put the mechanism into the gaslift.
(M8*45) screws.
Functions
(The size will be according to regular practice)
Armrests
height
adjustment
Seat height
adjustment
Backrest tilt angle
adjustment
Parts list
(The size will be according to regular measurements; One more as a backup )
Castor:5pcs
Base:1pc
Seat cushion:1pc
Backrest:1pc
Gas lift:1pc
Small shim:10+1pcs
Hex wrench:1pc
Mechanism screw(M6*20):4+1pcs
0
1
2
3
4
Headrest height
adjustment
Lumbar support depth
& height adjustment
Backrest tilt tension
adjustment
Headrest:1pc
Armrests:1pair
Mechanism:1pc
Big shim:3+1pcs
Back plate screw(M8*45):3+1pcs
Armrest screw(M6*25):6+1pcs
Notice: Before installation,
pls classify the screw,
measure the screw lengh
for easy assemble
5
6
7
8
9
10
cm
Werbung
