Hama 00176617 Bedienungsanleitung Seite 7

Note: Pairing restart
First remove the rubber protector on the back of
the door chime. Now press the Reset button with a
needle or another thin object until a signal sound
is heard. As soon as the LED starts to flash red,
you can start a further pairing attempt.
7. Integrating devices into the Hama Smart
Home (Solution) app
• Connect the door bell as described in Section 5 to
a power source.
• The LED on the doorbell starts to flash quickly. If it
does not, press and hold the Reset button (8) on
the doorbell for around 5 seconds.
• Open the app and sign in.
• Press the "+" in the top right-hand corner to add
a new device.
My Home
5
• Choose Doorbells in the list.
• Now confirm that the doorbell's LED is flashing
quickly by ticking "Next step" and clicking on
"Next". Ensure that the "QR code" is at the
top right.
• Next enter your WiFi password and confirm with
"NEXT".
• Then scan the QR code with the camera from a
distance of approx. 15 - 20 cm.
• As soon as you hear a signal sound, click "Signal
sound heard".
• Your doorbell is now connected.
Connecting Now