Care & Cleaning - Turbotronic Turbowave bio TT-FD14-D Bedienungsanleitung

Operation of this food dehydrator
1. Slice food (for example, fruit) into 5 to 8 mm thickness and put the slices on wire racks.
2. Put wire racks into the cabinet.
3. Plug the dehydrator. You will hear a BEEP and the screen shows
4. Select temperature by pressing "↑" or "↓" on the control panel.
Temperature changes degree by degree from 35ºC to 80 ºC.
To fast change temperature in a short time, keep your finger on the control panel.
5. Adjust time by pressing "+" or "–" on the control panel.
Timer changes every 30 minutes from 30 minutes to 24 hours.
To fast change timer in a short time, keep your finger on the control panel.
6. After adjusting temperature and timer, press POWER button to start dehydration
process.
7. As soon as dehydration process finished, you will hear 4 BEEPS. Then the machine is
switched off automatically.
8. During the dehydration process, timer and temperature shows on the screen every 3
seconds.
9. When the machine is running, you cannot change time and temperature. If this change
is necessary, press POWER to stop the process then re-start again.
10. Please avoid opening the glass door too often during dehydrating process.
Warning: Be sure to unplug the oven and allow it to cool before cleaning.
Any spattering that occurs while cooking and comes into contact with the continuous
coating is oxidized while the oven is in operation. If desired, wipe the walls with a damp
sponge, cloth or nylon scouring pad and mild detergent. DO NOT USE STEEL WOOL
SCOURING PADS, ABRASIVE CLEANERS OR SCRAPE THE WALLS WITH A METAL
UTENSIL, AS ALL OF THESE METHODS MAY DAMAGE THE CONTINUOUS CLEAN
COATING.
All accessories should be washed in hot soapy water or can be cleaned in a dishwasher.
The door can be wiped with a damp sponge and wiped dry with a paper or cloth towel.
Clean the outside with a damp sponge. DO NOT USE AN ABRASIVE CLEANER AS IT
MAY DAMAGE THE EXTERIOR FINISH.
DO NOT USE AN ABRASIVE CLEANER OR STEEL WOOL SCOURING PAD ON THE
DRIP PAN AS IT MAY DAMAGE THE PORCELAIN ENAMEL FINISH.
LET ALL PARTS AND SURFACES DRY THOROUGHLY PRIOR TO PLUGGING OVEN
IN AND USING.
Due to continuous product improvement, specifications subject to change without prior
notice.
Care & Cleaning
3
for 1 second.