Ashdown Engineering METERS LINX Benutzerhandbuch Seite 7

TWS Earbud Controls
Power On:
To power on the earbuds simply open the charging case and remove the
earbuds, they will automatically power on.
If your earbuds are out of the case and powered down (after 5 mins of no use,
they auto power down) you can simply touch both earbuds for 1 second to
power them up.
Power Off:
Simply put your earbuds back into the charging case and close the lid to
power off.
If no device is connected for 5 minutes the earbuds will auto power off.
You can also long press both earbuds together for 5 seconds to power off.
Pairing:
When the charging case is opened the earbuds automatically go into pairing
mode. Go to your devices Bluetooth® menu and choose the earbuds from the
list, they will be named 'Meters'. Once connected to your device every time you
open the charging case, they will automatically pair with your existing device.
If the existing device isn't found after 10 seconds the earbuds will go back into
pairing mode.
Disconnect:
If you wish to disconnect your earbuds from your current paired device, you can
long press and hold both earbuds at the same time for 3 seconds.