Cpu_Fan1, Pump_Fan1, Sys_Fan1~3: Fan Connectors; Jtpm1: Tpm Module Connector - MSI Z490M -S01 Bedienungsanleitung

CPU_FAN1, PUMP_FAN1, SYS_FAN1~3: Fan Connectors

PWM Mode fan connectors provide constant 12V output and adjust fan speed with
speed control signal. When you plug a 3-pin (Non-PWM) fan to a fan connector in
PWM mode, the fan speed will always maintain at 100%, which might create a lot of
noise.
Connector
CPU_FAN1
PUMP_FAN1
SYS_FAN1~3
⚠
Important
You can adjust fan speed in BIOS > Advanced > Hardware Monitor.

JTPM1: TPM Module Connector

This connector is for TPM (Trusted Platform Module). Please refer to the TPM
security platform manual for more details and usages.
2
1
16
Overview of Components
Default fan mode
PWM mode
PWM mode
PWM mode
1
1 Ground
3 Sense
1
Master In Slave Out (SPI
3
12
5
7
11
9
11
Max. current
2A
2A
1A
PWM Mode pin definition
2 +12V
4 Speed Control Signal
SPI Power
Data)
Reserved
Ground
Reserved
Reserved
Max. power
24W
24W
12W
2 SPI Chip Select
Master In Slave In (SPI
4
Data)
6 SPI Clock
8 SPI Reset
10 No Pin
12 Interrupt Request