Battery Operation - Hama 00176617 Bedienungsanleitung

Specifications according to
Regulation (EU) 2019/1782
Brand name,
commercial register
number, address
Model identi er
Input voltage
Input AC
frequency
Output voltage / output
current / output power
Average e ciency
during operation
E ciency at low load
(10%)
Power consumption at
zero load
4.2 Technical data - door chime
Power supply
Frequency band
5. Installation

5.1 Battery operation

• Mount the bracket in a suitable place.
• Connect the USB charging cable included to the
charging port on the doorbell and a suitable mains
socket. Fully charge the doorbell.
• Place the doorbell in the bracket and secure it
with the screw.
5.2 Mains operation (optional)
• Feed the AC power supply cables (AC 12V-24V)
through the rectangular opening in the bracket
and mount it in a suitable place.
• Connect the cables as shown (see wiring
diagram A).
• Place the doorbell in the bracket and secure it
with the screw.
4
Hama, HRA12159,
Dresdner Str. 9,
86653 Monheim,
Germany
GTA92-0501000EU
100-240 V
50/60 Hz
5.0 V DC / 1.0 A
/ 5.0 W
73.6%
63.9%
0.09 W
5 V 1 A
433.92 MHz
6. Start-up and operation
Here's how easy it is:
Download the app
• Download the Hama Smart Home (Solution)
APP from the Apple App Store or Google Play
Store.
• Open the Hama Smart Home (Solution) APP
• The rst time you use the app, you need to register
and create a new account. If you already have an
account, log in with your access details.
• Follow the instructions in the app.
Note
A detailed description of the
Hama Smart Home (Solution) App
and its full scope of functions can be found in our
App Guide at:
www.hama.com ð Article Number ð Downloads
ð App Operating Instructions
Door chime
• Press the Reset button (3) to connect the door
chime to the doorbell.
• The LED (2) on the door chime starts to ash.
• Then press the bell button (5) on the doorbell.
• The door chime is now connected to the doorbell
and the LED (2) lights up permanently.
Adjusting the volume or ring tone
• Navigate in the APP to the "Ring settings" tab.
• Set the desired volume and desired door chime.
• Press the Reset button (3) on the door chime.
• The LED (2) on the door chime starts to ash.
• Press the bell button (5).
• The settings are transferred.
Note
To ensure ringing of the mobile phone, this must
not be set to silent / vibrate.
Note: Pairing restart
First remove the rubber protector on the back of
the door chime. Now press the Reset button with a
needle or another thin object until a signal sound
is heard. As soon as the LED starts to ash red,
you can start a further pairing attempt.