Installation - Marechal Electric EVO Bedienungsanleitung

►INSTALLATION

• Panel mounting devices require a
straight adaptor. Respect its orientation
during its assembly.
• Accessories (adaptors, handle) are
clipped at the rear of the supply or load
part according to a defined orientation.
The largest notch (XXL) must be at 9
O'clock from the OFF marking.
• To separate a part (source or load)
from its rear accessory, insert a 7 mm
flat screwdriver into the notch in this
part and gently lift the retaining tab of
the rear accessory.
• The surface box may accommodate
one M40 or two M25 entries.
• EVO is delivered with an adhesive
graphical symbol of padlockable,
enclosed isolating switch with separable
envelopes. Affix this label in a clearly
visible location for the operator.
IS 39 [EVO] Rev D.0 - 2022-02
12/50 . ,