How To Install The Product; Route The Cables - Axis TQ6905-E Washer Kit Installationsanleitung

AXIS TQ6905-E Washer Kit

How to install the product

Mount the metal cage
1. Remove the tank from the metal cage.
2. Unscrew the tank plug and remove it from the tank.
3. Remove the pump and level gauge from the tank.
4. Mount the metal cage to a wall using screws.
See Hardware overview on page 10 to locate the parts.
CAUTION
Before starting any operation, make sure the power supply is disconnected.
NO TICE TICE
NO NO TICE
• The product must be fastened with suitable equipment. The fastening means must
guarantee to hold a force equal to at least 3 times the weight of the product.

Route the cables

For information about how to route the cables please refer to the installation guide of your
compatible Axis product.
12