Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Keep remotes out of reach of children.
•
•
Remote controls may only be operated by persons who are familiar with the system and have been instructed in their function.
Coding in remote controls must always be carried out within the vicinity of the door operator. Use only original parts.
•
•
Protect remotes from rain, snow, sunlight or dust, otherwise the function of the transmitter may be impaired
•
To replace the battery, unscrew the screws on the back of the remote.
The original remote control and the pairing Jane V remote must have the exact same frequency range.
•
Programming:
Note: Please follow the steps below careful and attentively.
1.
Press and hold down the buttons 1 & 3 (as in the model above) simultaneously till the green LED flashes.
2.
Press and hold down the button you want to code whilst holding both remotes together as shown in the pictures
below.
3.
The LED of the Jane V will now blink faster, because the remote control is searching for the fitting code to copy.
4.
Afterwards press the button on your original remote, which can send the right coding to inherit.
5.
If step 4 has been carried out correctly then the LED on the Jane V will glow for a moment and switch itself off
afterwards.
The remote control is now encoded.
6.
For each new coding please repeat the procedure again in the right sequence.
If the duplication procedure didn't work as expected, please follow the steps below:
• Try to repeat the procedure by holding the remotes in different positions.
• If the Jane V has confirmed the copied signal but is still not working please repeat the procedure but hold the
remotes about 1/2 cm apart from each other.
• Please exchange the battery in your original remote. An empty battery wont be able to send out the right coding
onto the Jane V.
Warranty: 24 months – Manufacturing and technology 100% made in Italy – Patented product
The undersigned Luigino Pellattiero, legal representative of ITALFILE srl, declares that the remote control JQxxx-2/JQxxx-4, manufactured in 2011
Directive 2004/10/CE – know as the Electromagnetic Compatibility Directive
Directive 2002/95/CE – known as the RoHS Directive – And therefore complies with current standards.
Remote Control Jane V
Frequency: 433,92 MHz - 868,3 MHz
Encryption: FIXED-Code
Channels: 4
Energy supply: Lithium battery 3v (CR2032)
Working temperature: -40°C - +50°C
or
Simplified EU Declaration of Conformity (CE)
Compliance statement
was assembled in compliance with the following standards:
Luigino Pellattiero – Vincenza, 1.10.2011
Schartec
a trademark of bau-shop-24 GmbH
Fritz-Müller-Strasse 115
73730 Esslingen, Germany
or
Werbung
