Original operating manual
filters and strainers FI
Type of fault
Functional fault:
It is impossible to exchange
the sieve/filter correctly:
The fitting must be repaired
FI-4.X.22.4 Issue 01.09.2022
Action
If during cleaning it is found that the fixture of the sieve/filter or other parts
of the fitting are damaged:
Repair necessary: damaged parts have to be replaced.
If the repair is to be carried out in the customer's workshop:
make a note of all data according to the markings on the fitting and order
the spare parts and necessary instructions from MANKENBERG. See
section Further information [} 14] for addresses
or:
Send the fitting to the manufacturer for repair. See section Further
information [} 14] for the addresses.
13
www.mankenberg.com