Jacob Jensen Indoor & Outdoor Thermometer Handbuch Seite 14

UK US
JACOB JENSEN
TM
Congratulations with your new JACOB JENSEN
This thermometer is developed and constructed in Denmark and designed by the
world famous designer Jacob Jensen, whose products are recognized for optimal
function, exquisite and beautiful design . Jacob Jensen has recieved more than 100
prizes from around the world, and has several products included in the Design
Collection and the Design Study Collection of The Museum of Modern Art in New
York .
The JACOB JENSEN Thermometer is available in two versions; an indoor and an
TM
outdoor version . The outdoor version has got a 3 meter cable with a probe attached .
The probe has to be mounted outdoors to measure the outside temperature .
Both versions has got a memory function, for the highest (MAX) & lowest (MIN)
temperature measured (since last reset), a RESET button and a switch button between
Celsius and Fahrenheit (°C/°F) . Both versions are wall mountable .
Mounting and replacing battery
The thermometer requires 1 "AAA" battery (included - mounted in the battery
compartment) .
1 . Open the battery-cover on the back of the thermometer
14
Thermometer (registered design)
Thermometer .
TM
2 . Mount the battery as indicated by the polarity symbols (+ / -) marked inside the
battery compartment
3 . Replace the battery-cover .
Notice
1 . When you install or replace the battery, it takes time to reset the temperature data .
The display will show "----" for maximum 3 to 4 seconds, then show the updated
temperature .
2 . When the display starts to go dimm it is time to replace the battery .
The Memory Function
The thermometer will automatically store the highest and the lowest temperature
measured since the last reset and you can recall those readings as follows:
Maximum temperature
Push the MAX button once and the display will show you the highest temperature
measured since last reset . To go back to current temperature: Push the MAX button
again and the display will show the current temperature .
Minimum temperature
Push the MIN button once and the display will show you the lowest temperature
measured since last reset . To go back to current temperature: Push the MIN button
again and the display will show the current temperature .