Thermrup HG618H Gebrauchsanweisung Seite 10

• Pull the cable from the battery bag. Connect the cable with
the battery.
• Insert the battery into the battery bag. Close the zipper.
•
Press the power button for approx. 2 seconds to switch on
the heating function. Then press the power button briefly (if
necessary, several times) to set the desired temperature level
(level-2-3-4, red-yellow-blue-green).
The 1st level is the warmest level. (LED indicator is red)
The 2nd level is the middle level. (LED indicator is yellow)
The 3nd level is the low level. (LED indicator is green)
The 4nd level is the lowest level. (LED indicator is blue)
• The lower four circle-LEDs indicate show the remaining
capacity of the battery.
• Press the power button for approx. 2 seconds to switch off the
heating function.
** Stop using when you see redness on the skin. Excessive
heat can cause burns！
indicator
LED
Power button
indicator
LED
(battery capacity)
(Temperatur levels)
9