eInstruction CPS Pulse Bedienungsanleitung

FOR RESPONSE
The CPS Pulse Keys
You will use your CPS Pulse clicker as you do your other handheld de-
vices that have keypads. Key touches are described here as presses.
Several keys have two types of key presses – press and press and hold.
ICON NAME DESCRIPTION
Displays Channel # or homework bin,
Channel #
depending on mode.
Enter/Send Animated during transmission. OK
when transmission acknowledged.
Correct/
Indicates correct or incorrect answer.
Incorrect Teacher must activate this option.
RF Activity Up arrow flashes for each transmit,
Indicators down arrow flashes for each receive.
Indicates which of the text entry modes -
Text Entry
Mode alpha, numeric, SMS - is currently in use.
Self-Paced Indicates that the keypad is operating in
Mode Self-Paced Mode.
Homework Indicates that the Pulse is being used in
Mode Homework Mode.
Saved Indicates that homework answers have been
Homework saved to memory for later transfer to CPS.
Battery Indicates the current battery voltage from full
Status to low to very low. Very low will flash.
Alpha/Numeric/SMS Entry
Switch text entry mode
Press
key multiple times to cycle
through the text entry modes.
As you change modes, they are
pictured on the Screen.
Each time you turn on your CPS Pulse clicker, you will be prompted to enter your
Student ID.
• Power on your CPS Pulse clicker.
• Carefully type your Student ID, using the Text Entry Mode key to switch text modes,
if necessary, and the Backspace key to remove mistypes.
• Press the Enter key.
• Re-type your Student ID to confirm and press the Enter key again.
Your Student ID is stored in your CPS Pulse clicker's memory until you turn your clicker off, and
is sent with each of your answers to identify it as coming from you.
The Screen
Left Navigation
Backspace
Plus/Minus
Power
Press
to power on
your CPS Pulse.
Press and hold
for
2 seconds to power
down your CPS Pulse.
Menu
Press to access the Main Menu.
Press the Navigation keys to scroll the Menu.
Press the Enter key to select a Menu item.
Menu Item
Join
Homework Press the Enter key to use Home-
Channel
Clicker #
Student
ID
Greeting
Contrast
Diagnostic
Unlock
Right Navigation
Enter/Send
Symbol
Press
through Symbols Table.
Symbols Table
. Period
, Comma
/ Division
* Multiplication
+ Plus
- Minus
Space
( Open Parenthesis
) Close Parenthesis
x
Jump/Search
Press
in a self-paced test or homework
assignment.
Press and hold
the next unanswered question.
1
Description
Press the Enter key.
Type the Join Code for the Class.
work Mode.
Displays the Channel # in the
upper left corner of the Screen.
Displays the clicker's assigned
number.
View the SID locked in clicker's
memory. Can only be changed
using Unlock Menu item below.
The Greeting displays when you
turn on the Pulse.
Press the Enter key, type your
greeting, press the Enter key
again to save it.
Press the Navigation keys to
adjust the contrast from low
contrast (1) to high contrast (6).
Displays the Pulse's Serial num-
ber, your Pulse type, the signal
strength, and firmware version.
Enter the Unlock key obtained
from the Response Student sec-
tion on eInstruction's Web site.
key multiple times to cycle
y
= Equal
> Greater than
< Less than
≥ Greater than or equal
≤ Less than or equal
| Pipe
√ Square Root
^ Caret
@ Email
key to jump to a question
key to search for