Connecting A Tv Using An Hdmi Cable (Commercially Available) - Yamaha SR-C30A Schnellstartanleitung

Connecting a TV using an HDMI cable (commercially available)

Control signals are transmitted from the TV to the sound bar when the sound bar is connected to a TV using an HDMI cable (commercially
available). This will enable you to use the HDMI Control function that controls the sound bar using the TV's remote control.
If the HDMI cable is connected to the TV's HDMI input jack compatible with Audio Return Channel (labeled as "ARC"), the TV audio signal is also
transmitted to the sound bar via the HDMI cable. Therefore, a TV can be connected to the sound bar using a single HDMI cable.
When connecting to an HDMI input jack not compatible with ARC, also connect the included digital optical audio cable to transmit the TV audio
signal to the sound bar.
Connecting to an ARC-compatible HDMI input jack
TV
HDMI input jack (ARC compatible)
ARC
HDMI
TV audio signal
HDMI
Sound bar (rear)
 NOTE
• When the sound bar is connected to a TV via an HDMI cable, confirm that the TV's settings are properly configured as follows:
- The TV's HDMI Control function is enabled.
- The TV's audio output is set to ARC (when an ARC-compatible HDMI input jack is connected).
• Connect AV devices (such as BD/DVD players and set top boxes) to the TV's HDMI input jacks.
HDMI IN
Control signal
HDMI OUT/TV (ARC) jack
Connecting to an HDMI input jack not compatible with ARC
Digital optical audio
output jack
TV
OPTICAL
O
1. Remove the cap.
2. Check the orientation
O
of the plug.
Sound bar (rear)
HDMI input jack
HDMI IN
HDMI
TV audio Control
signal signal
HDMI
HDMI OUT/
TV jack
TV (ARC)
jack
7
En