fontastic Casy Bedienungsanleitung Seite 5

GB
User manual
Thank you for purchasing the Fontastic® wireless speaker „Casy"
incl. TWS headset. Please read the user manual carefully and
follow the safety instructions.
Package contents
• 2 x Casy wireless headset
• Multi-case (speaker | charging case | LED light)
• USB Type-C™ charging cable
• User Manual
Overview:
1. Multi-function sensor
2. Status LED
3. Charging contacts
4. Loudspeaker
5. Loudspeaker
6. Cover
7. Status LED
8. Multifunction button
9. Volume-
10. Volume+
11. Headset slots
12. LED lamp
13. Switch LED lamp
14. Microphone
15. Charging status indicator
16. Type-C™ charging port
Charging the headsets
Insert the headsets into the slots of the multi-case. Close the case.
By closing it, the headsets get contact and are charged in the
automatically.
Charging the Multi-Case
Charge with cable: Connect the charging cable that came with
the case to the Type-C™ charging input of the case and a travel
charger or USB port of a computer to charge the built-in battery.
The charging status indicator on the multi-case shows the current
charge of the battery in 25%, 50%, 75% and 100% increments
respectively.
Wireless Charging: Place the multi-case with the back centered
on a connected wireless charger. The LED will indicate that the
case is charging.
7
1
2
3
5
6
7
8
9
10
11
12
Headset Power On/Off
Automatic:
Remove both headset units from the multi-case, they will turn on
automatically.
Put the headsets into the multi-case and close it, the headsets will
turn off automatically.
Manual:
To turn on the earbuds manually, press and hold the multi-function
sensor on either earbud for 4-5 seconds until the LED indicator
flashes blue.
To manually turn the unit off, press and hold the multi-function
sensor on either earpiece for 4-5 seconds until the LED indicator
turns off.
4
Note: Both headsets automatically turn on and off when
removed from the case or inserted.
Multi-Case Power On/Off
To turn on the Multi-Etui wireless speaker, press and hold the
13
Multi-Etui multifunction button for approximately 2 seconds.
To turn off the Multi-Etui, press and hold the Multi-Etui's
14
15
multifunction button for approximately 2 seconds.
16
TWS connection of the headsets
Take both headset units out of the multi-case, they will switch on
automatically. The right headset is automatically connected to the
left headset.
Status LED (headset)
• One of the headsets does not light up, the other flashes red and
blue alternately: Pairing mode (TWS connected).
• Both headset units stop flashing: Connected to BT device or
switched off.
Pairing
The headset and multi-case must be connected to a Bluetooth
enabled device to be used wirelessly.
Pair headset:
1. By removing both headset units from the multi-case, they
automatically turn on and enter pairing mode to connect to a
Bluetooth
2. Search for „Casy" on your Bluetooth
select it from the list of found devices to pair the headset with
the Bluetooth
®
source.
® enabled device and
®
device.
GB
®
8