Pedalo starr Anleitung Seite 2

Manual
20090000
Pedalo ® Support Bars 'Rigid'
Please read instruction completely and keep it.
Assembly of the supports:
The supports are screwed on the sides of the foot
boards.
Each 2 screws (M8 x 40 mm) per support are
inserted from above at a distance of 10 cm
through the holes on the footboard.
Now screw on the support lug firmly from below
by using each 2 nuts with washer per board.
Check screws occasionally!
Parts of the product are made of natural beech wood. Differences in color, structure, grain, small included knots or scars,
prove the genuineness of the material and therefore show no reduction in quality.
Maintenance and cleaning:
Can be wiped off with a damp cloth. Do not use any solvent-based, acidic or abrasive detergents.
Protect item from damp and wet.
Copyright ® by Holz-Hoerz GmbH Seite/page 2 von/of 2
Holz-Hoerz GmbH
Dottinger Str. 71
D-72525 Münsingen
Tel. +49 (0) 7381 - 9357 0
Fax +49 (0) 07381 - 9357 40
info@pedalo.de
www.pedalo.de
Stand: 2.3.2020 He/_e ph 13.3.2020