A
RECIPROCATING SAW
1 APPLICATION
It is not designed for commercial use.
2 DESCRIPTION (FIG. A)
1. Blade
2. Pivot shoe
3. Quick-release blade clamp
4. Position regulator button
5. On/off switch trigger
6. Lock-off button
7. Power cord & plug
8. Locking nut (no shown)
3 PACKAGE CONTENT LIST
• Remove all packing materials
• Remove remaining packaging and transit supports (if existing)
• Check the completeness of the packing content
• Check the appliance, the power cord, the power plug and all accessories for transportation damages.
• Keep the packaging materials as far as possible till the end of the warranty period. Dispose it into your local
waste disposal system afterwards.
• Reciprocating saw
• Manual
• 2 saw blades
• 1 hex key
When parts are missing or damaged, please contact your dealer.
4 SYMBOLS
In this manual and/or on the machine the following symbols are used:
2
71799 manual.indd 2
WARNING! Read this manual and general safety instructions carefully before using the
appliance, for your own safety. Your power tool should only be passed on together with
these instructions.
WARNING Packing materials are no toys!
Children must not play with plastic bags!
Danger of suff ocation!
Always wear hearing protection
Always wear protective gloves
Read manual before use.
Class II - The machine is double
insulated; Earthing wire is there-
fore not necessary.
FIG. A
Always wear safety goggles
Wear a dust mask in dusty conditions.
In accordance with essential requirements
of the European directive(s)
Do not dispose old appliances with domes-
tic rubbish.
13-01-11 12:59