Achtung! Die Nichtbeachtung der nachfolgenden Bedienungsanleitung kann zu Verletzungen oder Schäden am Gerät führen! Grundlegende Sicherheitshinweise • Bitte diese Anleitung sorgfältig durchlesen und aufbewahren. • Die Montage von elektrischen Medien-Geräten und die Verbindung der Netzanschlüsse darf nur durch qualifiziertes und eingewiesenes Fachpersonal erfolgen.
Mobilität bieten im Bedarfsfalle vier Rollen, die beiden hinteren mit Feststellbremsen. Ein Logo- und Namensschildhalter kann an der Front befestigt werden (optional). Die indirekte RGB-Frontbeleuchtung (optional) lässt das Pult per LED-Technik in jeder gewünschten Farbe, z. B. der Firmenfarbe, erstrahlen und kann somit Veranstaltungen je nach Wunsch optimal in Szene setzen. 2.2.
5.3 Installation von zusätzlicher Medientechnik Achtung: Die Installation von medientechnischen Komponenten ist ausschließlich von geschultem und eingewiesenem Fachpersonal durchzuführen! Grundsätzlich werden elektrische Komponenten im Pult fest eingebaut. Die Geräte am Strom anschließen (Steckdosenleiste im Pult) oder mit anderen Geräten mit entsprechenden Steuer- und Signal- leitungen verbinden.
6. Technische Daten – SpeechPoint³ Artikelnummer 5317SP0 00x Abmessungen 66 x 69 x 107 – 135 cm (BxTxH, motorisch verstellbar) Gewicht (ohne Zubehör) ca. 65 kg 62 x 50 cm (BxT) Standard mit Lederapplikation, Pultfläche (abschließbar) 0 – 20° Neigung Trittschallentkoppelt, XLR 3-polig, Mikrofonaufnahme (opt.) mit integriertem Verschlussdeckel ca.
Dank der Rollen kann das Möbel auf ebenen Flächen problemlos transporiert zum Aufstellplatz gerollt werden. 9. EG-Konformitätserklärung Hinweis: Die aktuelle Montageanleitung kann von unserer Webseite heruntergeladen werden: www.kindermann.com Die aktuell gültige CE-Erklärung kann unter folgender URL eingesehen und heruntergeladen werden: https://shop.kindermann.de/erp/webshop/navigationPath/5317SP0001.html...
• The total power consumption of all connected consumers must not exceed 2500 W. • Have damaged power cords replaced immediately to avoid danger to users. • The SpeechPoint3 may only be operated in closed and dry rooms. • Do not expose this device to dripping or splashing water.
Mobility is provided by four castors, the rear two with parking brakes, if required. A logo and name badge holder can be attached to the front (optional). The indirect RGB front lighting (optional) allows the desk to be illuminated in any desired color, e.g. the company color, using LED technology, and can thus be used to optimally stage events as desired.
5317 SP0100 • Logo mounting 5311 TP0103 Further special equipment on request: Matching projectors, displays, visualizers, document camera, touch displays, media controls, control panel, wireless systems (click & show), microphones, RFID locking system etc. see www.kindermann.com _Assembly and operating instructions SpeechPoint...
5.3 Installation of additional media technology Attention: The installation of media technology components must be carried out by trained and instructed personnel! Basically, electrical components are permanently installed in the lectern. Connect the devices to the power supply (socket strip in the console) or connect them to other devices with appropriate control and signal lines.
6. Technical data - SpeechPoint³ Item-No. 5317SP0 00x Dimensions 66 x 69 x 107 – 135 cm (WxDxH, motor adjustable) Weight (without accessories) approx. 65 kg 62 x 50 cm (WxD) standard with leather application, Desk area (lockable) 0 - 20° inclination Impact sound decoupled, XLR 3-pole, Microphone connector (opt.) with integrated sealing cap approx.
Thanks to the casters, the furniture can be easily transported to the installation site on flat surfaces. 9. CE Declaration of Conformity Hint: The current assembly instructions can be downloaded from our website: www.kindermann.com The currently valid CE declaration can be viewed and downloaded at the following URL: https://shop.kindermann.de/erp/webshop/navigationPath/5317SP0001.html&request_locale=en_GB 5317 SP000x D/EN 2022-08 / 842 214 Änderungen vorbehalten /...