Introduction; Product Features - Omnitronic ZD-250 Bedienungsanleitung

Contents
1 Introduction ............................................. 10
Product features ....................................... 10
2 Safety Instructions ................................. 11
3 Operating Determinations ..................... 12
4 Operating Elements and Connections . 13
5 Setup ........................................................ 14
Installation ................................................. 14
Cable connections .................................... 14
Operation .................................................. 14
6 Cleaning and Maintenance .................... 15
7 Technical Specifications ........................ 15
For product updates, documentation, software and
support please visit www.omnitronic.de. You can find
the latest version of this user manual in the product's
download section.
© 2022 OMNITRONIC. All rights reserved.
No part of this document may be reproduced in any
form without the written permission of the copyright
owner. The contents of this document are subject to
revision without notice due to continued progress in
methodology, design, and manufacturing.
All trademarks mentioned herein are the property of
their respective owners.
D00141942, version 1.1, publ. 11/08/2022

1 Introduction

The ZD-250 distributes two line signals to five
outputs. Each zone has separate level controls,
signal and clip indicators and can be switched
between stereo and mono operation. Thus it is
possible to e.g. apply two stereo signals to up to
five amplifiers and to individually adjust the
volume. The device provides XLR connectors and
is designed for rack mounting.
This user manual will show you how to install and
operate the device. Users of this product are
recommended to carefully read all warnings in this
manual and on the unit in order to protect yourself
and others from damage.
This user manual is valid for item number:
10304110 and 10304111. Please save this
document for future needs and pass it on to
further owners.

Product features

• Practical distributor with 2 inputs and 5 outputs
• Extends every mixer with additional outputs
• 2 stereo XLR inputs
• 5 stereo zone outputs (XLR)
• Each zone with level control and mono switch
• LED display of signal input, distortion and
mono/stereo mode
• Rack installation with 1 U
10 • EN