Herunterladen Diese Seite drucken

Pedalo Safety Anleitung Seite 2

Rollbrett stapeleinrichtung

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Manual
20162000
Pedalo
®
Scooter Board 'Safety'
Stacking Frame
Before using the device for the first time
(or before starting with assembly),
please read instruction completely and keep it.
Important information and warning hints:
Warning!
The packing is not part of the product and have to be disposed.
Keep plastic bags and films out of the reach of babies and young children – RISK OF SUFFOCATION!
Warning!
The device is only to be used for the purposes described in this user manual.
Even if this device is also play-equipment for children, the assembling should be carried out or supervised always by an adult.
Warning!
Never move the stacked scooter boards over sloping levels or over edges. The stacking frame with the scooter boards could
possibly accelerate strongly or tip over. RISK OF INJURY!
After longer or frequent use, check that the screws are tight and retighten if necessary.
Defective and worn parts should be replaced by original replacement parts immediately.
The product is made of natural birch or beech wood. Differences in color, structure, grain, small included knots or scars, prove the
genuineness of the material and therefore show no reduction in quality.
Maintenance and cleaning:
Can be wiped off with a damp cloth. Do not use any solvent-based, acidic or abrasive detergents.
Protect item from damp and wet.
Assembly:
Insert the round rods into the two holes in the base plate.
These should protrude approx. 2cm on the underside.
Insert the M8 cross hole nut bolt into the holes in the base plate.
Screw the M8 x 60 mm hexagon socket screws including washer into the
cross hole nut bolts and tighten them until the round rod is firmly clamped.
Now the stacking frame can be attached to any Pedalo-Scooter Board
'Safety'.
Further Scooter Boards 'Safety' are attached to the wooden round bars
from above. The wheels always point down.
A maximum of 12 skateboards including "trolley" may be stacked on top of
each other.
The wooden round bars protruding upwards, serve as handles for pushing.
Holz-Hoerz GmbH
Dottinger Str. 71
Holz - Hoerz
72525
D-72525 Münsingen
Münsingen
Tel. +49 (0) 7381 - 9357 0
Fax +49 (0) 7381 - 9357 40
info@pedalo.de
www.pedalo.de
Item no
613311
011002
662052
623408
626063
627514
Single parts list:
Name
.
Qty
Base plate
1
Round wooden
2
bar 115 cm
Cross hole nut M8
2
Screw M8x60 mm
2
Washer 40x2 mm
2
Allen key 5mm
1

Werbung

loading

Diese Anleitung auch für:

20162000W0-ie 332 0004W0-b6 332 0004