Westfalia 96 72 89 Originalanleitung Seite 9

knob.
To set rivet nuts, screw the rivet nut, with the device handles spread apart, the
end of the pull rod protruding from the guide and push it through the mounting
hole provided. Push the device forward and bring the handles together to
compress the compressible part of the rivet nut. Then turn the pull rod with the
knob to unscrew it from the set rivet nut.
Cleaning
 Clean the device with a slightly dampened cloth. If necessary, use a little
washing-up liquid as well. Do not immerse the device in liquids. Use some
suitable oil to lubricate the moving parts and for protection against
corrosion.
 To avoid damaging the surfaces, do not use any harsh chemicals or abrasive
cleaners.
Technical Data
Blind rivets sizes:
Rivet nuts sizes:
Length:
3,2 mm, 4,0 mm, 4,8 mm, 6,4 mm
M3, M4, M5, M6, M8, M10, M12
approx. 400 mm
9