Usb Software Update - Chauvet Professional Color STRIKE M Schnellanleitung

Main Level
Information
Upgrade
Firmware
Factory Reset

USB Software Update

The Color STRIKE M allows for software updates with a USB device using the built-in USB port. To update the software
using a USB flash drive, do the following:
1. Power on the fixture, and plug the flash drive into the USB port.Once the flash drive has been detected, the
message "Upgrade Firmware" will be displayed. Press <ENTER>.
• If a different message appears on the display, search for the updated software in the Main Menu (Update
Firmware) and select from Only This Unit, Multiple Units, or Other Fixture Type. A list of the software
update files will be displayed.
2. Select the file that needs to be uploaded. The message "Are you sure?" will be displayed. Press <ENTER>.
3. If the selected file is correct, the upgrade will be completed. Restart the fixture.
• If the selected file is incorrect, the upgrade will fail, and the display will go back to the main interface. Repeat
steps 1–3 using the correct file.
The .chl format file needs to be placed in the "STRIKE" folder in the USB flash drive.
The "Other Fixture Type" option can only be selected for connected products compatible with the
Upload 03 (the first 2 digits of the item code must be 03).
Color STRIKE M QRG Rev. 8
QUICK REFERENCE GUIDE
Programming Levels
Fixture Hours:
LED Hours:
Disp Ver:
Drv-Y Ver:
LED-A Ver:
LED-C Ver:
Net Ver:
UID
Only This Fixture
Multiple Fixtures
Other Fixture Type
No
Yes
_ _ _Hours
_ _H
V_._ _ _ _ _ _
V_._
V_._
V_._
V_ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _.CHL
...
_ _ _ _ _ _.CHL
...
_ _ _ _ _ _.CHL
...
Description
Displays total hours the product has been
powered on
Displays the total LED hours
Displays firmware version
Displays the tilt PCB version
Displays the LED A PCB version
Displays the LED C PCB version
Displays the network version
Displays product UID
Selects an update file for this product, or
shows "No such file!"
Selects an update file for this and
connected Color STRIKE M products, or
shows "No such file!"
Selects an update file for other connected
products, or shows "No such file!"
Resets settings to factory default
EN
6