LightPro Juno 2 Bedienungsanleitung Seite 7

GB
Juno 2 / Juno 4
User manual
Thank you for purchasing the Lightpro Juno.
This document contains the required information for
the general manual of the Lightpro 12-volt system
and the user manual of your transformer for more
information about the set up and connection of your
light plan.
Read the information in this manual carefully before
using the product. Keep this manual near the product
for consultation in the future.
The Lightpro Juno is a LED spot for outdoor use. The
the included screws, or be placed in the ground with
the included spike. This product may only be used
as outdoor lighting in combination with the Lightpro
12-volt system. Any alteration made to the product
may have consequences for the safety, warranty, and
correct functioning of the product and/or other parts
of the system.
Product
Article number
Power
Dimensions (h x Ø)
Protection class
Ambient temperature
Cable length
Dimmable
[Figure A]
1. Fixture Juno
2. Baseplate
3. Screw
4. Screw
5. Spike
6. Screws
7. Plugs
8. Lightpro connector
9. Hex key
Lightpro Juno 2 / 4
193S / 194S
2 / 4 W
85 x 55 x 68 mm
IP44
-20°C to 50°C
2m
No
Check if all parts are present in the packaging. For
questions about parts, service, and any complaints or
other remarks, you can always contact us.
E-mail: info@lightpro.nl
[Figure B]
Mount the base [2] on the surface with the included
screw [6]
If necessary, drill a holes in the underground and
use the included plug [7]
[Figure D]
3. Fasten the screw [3] using the included hex key [9]
[Figure F]
Ready
[Figure C]
Mount the base [2] on the spike [5] with the included
screw [4]
[Figure E]
3. Fasten the screw [3] using the included hex key [9]
[Figure G]