Operation - Lacor 69081 Gebrauchs- Und Instandhaltungsanleitung

1.- Remove the wrapping before using the electrical appliance. Do not discard the wrapping until
you have checked that the blender is working correctly.
2.- Make sure that the blender is placed on a flat, dry surface. Avoid contact with areas of excessive
heat. Check that the connection cable and the power point are in perfect condition.
3.- Have fruit or vegetables prepared (for example: cut apple, carrot or other fruit and vegetables
cut into pieces), then add water. Do not exceed the maximum line on the blender. If you wish
to crush ice, add several ice cubes and water and then cover with the lid.
NOTE:
Do not use foods at a temperature above 50ºC.
4.- Place the glass jar correctly into the main body. If this is not done correctly, the engine will not
work as the safety cut-off switch in the main body will not be depressed.
5.- NEVER use the jar without the lid. The centrifugal force of the blender will throw liquid out of the
jar. This is also a basic safety measure to avoid risks to people.
6.- Make sure that the jar is not used when empty, as well as for very long periods of time, as this
could affect the useful life of the engine. In the event of the engine overheating, switch it off
immediately and wait until it cools down before using it again.
7.- Do not insert spoons or other items during use, as this could cause irreparable damage to the
knives and the engine.
8.- Connect the switch according to the desired use:
Use the P option to blend as you choose; keep the switch on the P position to keep
the blender working at maximum speed.
Use the 1 position to blend al low spped especially when crushing ice or hard solid
items.
The 2 position allows you to blend all types of soft fruits and liquids at maximum
spped.
Ensure the blender is at the 0 position before removing and pouring the contents
from the jug.

OPERATION

33