FLINQ Bamboo Qi Bedienungsanleitung Seite 3

screen. Now you will hear the buzzer rang a sound like "Bliep". Then enter the time mode, the
default time is 12:00, 24-hour with the default date at 2015 1.01 (1
1. Use the DOWN button to switch the sound control on/off. Click the DOWN button once to
disable the sound control, then the screen will show
enable sound control as the screen will show
enabled, the screen will light up for 13 seconds and after that it will light off. From now on, only
voices can awake up the screen, any sound can be used .
2. Click the UP button to switch the kind of temperature display:℃/℉
temperature ranges from -20℃ to 50℃ or -4℉ to 122℉. Long press the UP button for 3
seconds to adjust the display brightness of the screen, which can be adjusted in L1, L2 and L3. L1
is the brightest level.
3. Click the SET button once to switch the time display mode,
current time & temperature and current date (year/month/day).
current time & temperature;
4. Long press the SET button for three seconds to enter the setting mode. Then click, successively,
through the setting order as follows:
➢
Set year
➢
Set up ;
➢
Set day ;
➢
Set 12/24 hours display mode,
➢
Set minute
➢
Set hour
➢
Set alarm 1,
➢
Set alarm 1 hour
;
/
;
;
enable the alarm 1,
;
st
January 2015).
, click the button once again to
. After the voice control function is
;
disable the alarm 1;
/ . The
automatically switch the
only display the