Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating Instructions
PLUG-IN POWER ADAPTER
Item No. 2251735 SNG-600N-OW
Item No. 2251737 SNG-1000N-OW
Item No. 2251739 SNG-1500N-OW
Item No. 2251741 SNG-2250N-OW
Intended use
This product is designed to supply electric devices with power. It is particularly suited for operating decora-
tive LED or LED strip lighting installations such as nativity set lighting or modern direct or indirect lighting
of display cabinets, picture frames or mirrors. The connected load's current consumption must not exceed
the maximum output rating of the product. Power is supplied via a standard mains socket (100 – 240 V/AC,
50/60 Hz). Various voltages can be set with the key. The product should only be used in dry indoor areas.
The product features both short-circuit and overload protection.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product
for purposes other than those described above, the product may be dam- aged. In addition, improper use
can cause hazards such as short circuiting, fire, electric shock etc. Read the instructions carefully and keep
them. Make this product available to third parties only together with its operating instructions.
Delivery content
•
Power adapter
•
Key
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the
QR code shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in the triangle is used if there is a risk to your health, e.g. due to an
electric shock.
The symbol with the exclamation mark in the triangle is used to indicate important information in
these operating instructions. Always read this information carefully.
This symbol indicates that the product meets the energy efficiency requirements for Class VI.
Safety instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
a) Persons / Product
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become dangerous play-
ing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it
from any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
• Also observe the safety and operating instructions of any other devices which are connected
to the product..
• The product should not be used immediately after it has been brought from an area of cold
temperature to an area of warm temperature. Condensed water might destroy the product.
Wait until the product adapts to the new ambient temperature before use.
• Make sure that the output of the power adapter is not short-circuited.
• Never pour liquids over electrical appliances and never leave objects filled with liquids (e.g.
vases) on it or in the vicinity. There is a high risk of fire or life-threatening electric shock.
• Always lay the cables so that nobody can trip over or become entangled in them. This poses
a risk of injury.
• When setting up the product, make sure that the cable is not pinched, kinked or damaged
by sharp edges.
• The plug must be pulled out of the socket under the following conditions:
- before cleaning the product
- during a thunder storm
- if the product is not being used over a long period.
•
Operating instructions
b) Miscellaneous
• Consult an expert when in doubt about operation, safety or connection of the device.
• Maintenance, modifications and repairs are to be performed exclusively by an expert or at a
qualified shop.
• If you are not sure about the correct connection or use, or if questions arise which are not co-
vered by these operating instructions, please do not hesitate to contact our technical support
or another qualified specialist.
Operation
Ensure the polarity is correct when establishing a connection. The positive terminal of
the cable is identified by a white line and a sticker showing a +.
Ensure the power supply unit's open ends are insulated with suitable insulating material
at all times. This applies to the power supply unit whether it is installed or not.
Always unplug the power plug first before disconnecting the connectors from the consu-
mer.
1. LEDs and LED strips already feature soldering points where the power supply unit's open ends can be
attached. Ensure the polarity is correct. After assembly, insulate the connections with suitable insulating
material such as heat shrink tubing.
2. Set the required voltage (3 / 4.5 / 5 / 6 / 7.5 / 9 / 12 V/DC) with the key.
3. Connect the mains plug to a standard mains socket (100 – 240 V/AC, 50/60 Hz).
4. Remove the power adapter from the mains when it is no longer in use.
Cleaning
•
When cleaning, the power adapter must be disconnected from mains socket.
•
Only use dry and soft cloth to clear the housing of the power adapter.
•
Do not use abrasive or solvents.
Disposal
This symbol must appear on any electrical and electronic equipment placed on the EU market.
This symbol indicates that this device should not be disposed of as unsorted municipal waste
at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separa-
tely from unsorted municipal waste. Spent batteries and accumulators, which are not enclosed
by the WEEE, as well as lamps that can be removed from the WEEE in a non-destructive
manner, must be removed by end users from the WEEE in a non-destructive manner before it
is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-back of waste.
Conrad provides the following return options free of charge (more details on our website):
•
in our Conrad offices
•
at the Conrad collection points
•
at the collection points of public waste management authorities or the collection points set up by manu-
facturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in countries
outside of Germany.
Technical data
a) Data according to EU regulation 2019/1782
Manufacturer
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
Commercial registration
HRB 3896
number
BN
2251735
SNG-600N-
Model identifier
Input voltage
Input AC frequency
Output voltage
Output current
0.6 A
Output power
7.2 W
Average active efficiency
71.4 %
Efficiency at low load (10 %)
61.6 %
No load power consumption
0.08 W
b) Other
BN
2251735
Operating conditions
Storage conditions
Cable length
Dimensions (L x W x H) / (incl.
68.2 x 39.9 x
plug)
69.4 mm
Weight
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2022 by Conrad Electronic SE.
2251737
2251739
SNG-1000N-
SNG-1500N-
OW
OW
OW
100 - 240 V/AC
50 / 60 Hz
3.0 / 4.5 / 5.0 / 6.0 / 7.5 / 9.0 / 12.0 V/DC
1.0 A
1.5 A
12.0 W
18.0 W
72.4 %
73.6 %
67.2 %
74.3 %
0.09 W
0.09 W
2251737
2251739
0 to +40 ºC, 20 – 85 % RH (non-condensing)
-20 to +60 ºC, 10 – 90 % RH (non-condensing)
1.8 m
76.7 x 44.3 x
84.3 x 53 x
70.3 mm
70.3 mm
96 g
112 g
130 g
*2251735_2251737_2251739_2251741_v3_0722_02_dm_mh_en
2251741
SNG-2250N-
OW
2.3 A
27.0 W
79.3 %
78.2 %
0.09 W
2251741
89.2 x 56.5 x
76.3 mm
173 g
Werbung
