Use - smartmi P1 Benutzerhandbuch

Use

1 After connecting to a power supply,
press " " button to power on. Upon
initial startup, the purifier will operate
in "Auto" mode. For subsequent
startups, it will operate in such mode
that it is shut down previously.
2
Press " " button to set a mode for
the purifier.
Note:
When "Auto" mode is selected, " " will be illuminated on the screen, and the purifier will adjust the purification level automatically based on the IAQ.
In "Custom" mode, settings may be adjusted after connecting to the Smartmi Link app and adding a device. By default, the purifier can operate at full capacity in
this mode, resulting in slightly noisier operation but superior results.
7
Auto
Sleep
Normal
Custom