VOLTIMA SunCase Plus-Serie Montage- Und Bedienungsanleitung Seite 32

32 Voltima – SunCase Plus
Integrated USB-Ports
Voltima SunCase Plus solar modules feature two USB ports with an output of 5V and 2A, which
you can use to power or charge small, compatible devices such as mobile phones and digital
cameras.
Indicator LED
The integrated LED provides information on the status oft he solar module:
LED is
Green
(charging)
LED is
Red
(not charging)
LED flashing
Red
LED flashing
Red/Green
Note!
When the LED flashes, please disconnect the solar panel and DC load and check for any short
circuits.
If the LED is red when the solar module is connected to a load, disconnect the load or place
the solar panel in direct sunlight.
Open circuit:
> 14 V
Open circuit:
< 14 V
Low light level
Over current (Over current protection: 9 A)
Load:
> 14 V / < 14 V, > 0,5 mA
Load:
< 14 V / < 14 V, < 0,5 mA