physa MARSEILLE WHITE Bedienungsanleitung Seite 6

10
3. USE GUIDELINES
The product is an accessory for massage.
The user is liable for any damage resulting from
unintended use of the device.
3.1. DEVICE DESCRIPTION
ATTENTION! This product's view can be found on the
last pages of the operating instructions (pp. 31).
1. Handle
2. Button
3. Hole for armrests
4. Face cradle
5. Headrest
6. Front arm shelf
7. Armrest
8. Rope tension
9. Knee rest
10. The seat
3.2. PREPARING FOR USE
3.2.1. APPLIANCE LOCATION
Keep the product away from hot surfaces. The device
should always be used when positioned on an even, stable,
clean, fireproof and dry surface, and be out of the reach
of children and persons with limited mental and sensory
functions.
3.2.2. ASSEMBLY
MODELS: PHYSA MARSEILLE WHITE, (BLACK, BEIGE, RED,
BLUE), PHYSA TOULUSE WHITE, (BLACK, BEIGE, RED, BLUE),
PHYSA BORDEAUX WHITE, (BLACK, BEIGE, RED, BLUE,
TURQUISE)
1
2
3
4
5 6
7
8
1. Release the safety device.
2. Lay the table on its side and stretch the
table legs to the desired height.
• MODELS: PHYSA MARSEILLE WHITE,
(BLACK, BEIGE, RED, BLUE), PHYSA
TOULUSE WHITE, (BLACK, BEIGE, RED,
BLUE)
To adjust the table height, unscrew the
knobs, remove the movable leg and
insert it into the holes at the desired
height, then screw the knobs back on.
Note: Make sure the legs are the same
height.
• MODELS: PHYSA BORDEAUX WHITE, (BLACK,
BEIGE, RED, BLUE, TURQUISE)
To adjust the table height, press the button on
its leg and set the appropriate height. Note:
Make sure the legs are the same height.
3. Remove all accessories from inside.
4. Lift the table and place its legs on the floor.
5. Install the armrests.
6. Install the front arm-shelf on the headrest holder.
7. Adjust the headrest and lock it.
8. Correctly assembled table.
NOTE: the PHYSA MARSEILLE WHITE, (BLACK, BEIGE,
RED, BLUE), PHYSA BORDEAUX WHITE, (BLACK,
BEIGE, RED, BLUE, TURQUISE) models have an
additionally adjustable leg rest.
PHYSA MONTPELLIER WHITE, (BLACK, BEIGE, RED, BLUE)
1 2
3 3a
4 5
6 6a
7 7a
8
1. Set up the bottom of the chair.
2. Make sure the chair is firmly on the floor.
3. Unlock the adjustable handle and fold out the
headrest. Unlock the knob and the handle to change
the angle of the headrest. Adjust the headrest to the
desired height and lock it.
4. Adjust the chest-rest position.
5. Lock the chest-rest position with the knob.
6. Fold out the arm shelf and lock it at the selected
position.
7. Fold out the seat and lock the bracket.
8. Chair properly assembled.
3.2.3. DISASSEMBLY
MODELS: PHYSA MARSEILLE WHITE,
(BLACK,BEIGE,RED,BLUE) PHYSA TOULUSE WHITE, ( BLACK,
BEIGE, RED, BLUE), PHYSA BORDEAUX WHITE, (BLACK,
BEIGE,RED,BLUE, TURQUISE)
1. Remove all accessories (headrest, armrest, front
armrest).
2. Lay the table on its side.
3. Place the accessories under the elastic strap.
4. Fold the table legs, then fold the mattress and lock
the safety device.
11