Tesla SMART SENSOR SMOKE Benutzerhandbuch Seite 14

Troubleshooting
If the product malfunctions, its battery may have reached its
valid lifespan, or the product may be affected by dust, smo-
ke residue, or other dirt. If this is the case, refer to „Routine
Maintenance" for instructions on cleaning the product. If
the fault persists, perform the following operations:
1. If the product does not respond, check whether the
product is correctly mounted to the mounting base.
2. If the product intermittently beeps (at about 40s
intervals), the battery level is low. Replace the battery within
one week.
3. If you often encounter non-fire alarm, please try to
relocate your smoke alarm.
4. If the product generates alarms frequently when there is
no fire or smoke, clean the product or reinstall the product
in another position.
IMPORTANT
If the fault persists after you perform the preceding
operations, contact the local vendor. Do not disassemble
the product yourself, or the warranty service for the product
will become invalid.
14