Outsunny 842-270 Montageanleitung Seite 3

-If damage to any component is detected, DO NOT operate until repaired.
If rusting occurs, it is recommended to use a steel brush, followed by a spray
coating of high temperature anti-rust paint.
To keep the bowl, grate and mesh lid from rusting, it is recommended to apply a
coat of high temperature primer (such as rustoleum or similar brands) before use.
Ensure the fire pit has completely cooled down before placing a cover or storing.
Assembly instructions
Estimated assembly time: 10 minutes.
Ensure hardware is not too tight!
Step 1: Place parts on a smooth and even surface. Attach the legs (C) to the
tabletop using the bolt (G). Tighten all hardware accordingly using the provided
Allen wrench (J). Ensure all pieces are securely in place.
Step 2: Flip the assembled frame so it stands securely on a flat surface. Place the
fire bowl (F) into the centre of the tabletop (A) and put the iron gate (B) into the fire
bowl (F). Attach the lid ring (I) onto the mesh lid (E) using the nut (H). Place the
assembled mesh lid over the fire bowl (F) (Fig. 2 & 3).
FIG.3
Your FIRE PIT is ready for use!
Step 3: Table: Take away the
mesh lid (E) and place the table
lid (L) onto the fire bowl (F).
Your Table is ready for use!
2
EN