Herunterladen Inhalt Inhalt Diese Seite drucken

Technical Data; Replacing The Battery - HEITEC TONY Installations- Und Bedienungsanweisung

Solar led leuchte
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

5. Care
Use a damp cloth for cleaning.
Never use chemicals or scouring agents for cleaning.
The luminaire must be cleaned of dirt at regular intervals.
When using the luminaire outdoors, also pay attention to soiling, e.g. by leaves, and remove this
regularly.
Protect the lamp from frost.

6. Technical data

Article
1x Li-ion Akku 18650, 3,7 V
501123
7. Malfunctions
The luminaire does not light up or only lights up briefly:
 Light switched on?
 Battery weak or defective. Replace the battery
 An external light source (e.g. street lamp) prevents the lamp from switching on. Therefore, move
the lamp to a darker place. 8.

8. Replacing the battery

As a first step, switch off the panel on the underside.
To replace the battery, loosen the 4 Phillips screws on the underside of the solar panel.
Now remove the upper part, taking care not to damage the two cables between the upper and lower
parts.
The battery compartment is now accessible. When replacing the battery, ensure that the polarity is
correct.
The installation is done in reverse order.
9. Disposal
The symbol of the crossed-out dustbin means that you have a legal obligation to dispose of this
equipment separately from unsorted municipal waste. Disposal in the residual waste bin or the yellow
bin is prohibited. If the products contain batteries or rechargeable batteries that are not permanently
installed, these must be discharged, removed and disposed of separately as batteries before disposal.
H. Vollmer GmbH ǀ Allmendring 29 ǀ 75203 Königsbach-Stein ǀ www.HEITRONIC.de
Power supply
1500 mAh,
Protection
LED
type
3 LED, 4000 K
IP44
not changeable
Protection
class
III
4 / 8
02/22

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

501123

Inhaltsverzeichnis