Preparation Before Use; Start To Use Veme Machine - VEME V401 Bedienungsanleitung

3. During the automatic flash mode, simply press the flash button, the device switches to manual
flash mode.

Preparation before use

Before use, shave the area to be irradiated (Except for the face), keep it dry. This ensures that the
hair follicle under the skin absorbs energy to the maximum extent for optimum hair removal.

Start to use Veme machine

1. Plug the power cord into the device's power interface and connect to the power outlet.
(The device cannot be charged).
2.Then press the power button to turn it on. Press the level adjustment button to adjust the
level. Starting from the low level, if you feel comfortable, please adjust to the higher level for
better results.
3.Keep the lamp head 90°onto the skin. When the display flashes, press the flash button to emit
light. (Long press the flash button for 3s to start Auto flash.) It is recommended to irradiate 2
times for each area.
90°
4. After finished, press and holds the power button to turn off, then unplug the power adapter.
5. Wipe the lamp with a non-alcoholic wipe or a soft tissue.
6. Place the device in a dry, well-ventilated area, out of children's reach.
3