Festive Lights ConnectPro Bedienungsanleitung

Warnings
1. For decorative purposes only. Keep out of reach from children and animals. 2. This product cannot
be submerged in water and do not position this product near any source of direct heat. 3. If the starter
cable is plugged outdoors, ensure the outdoor socket or junction box is fully waterproof.
4. If a product becomes damaged, it must be disposed of accordingly. LED bulbs cannot be replaced.
5. Always consult Festive Light Ltd for technical advice. Keep this information sheet for future
reference. 6. If you are installing a large display, we recommend using a weather repellent spray in all
connections to reduce the likelihood of electrical trips and to eliminate human error. Q20 is available
to purchase from Festive Lights Ltd. 7. For any technical information relating to this product, please
email Festive Lights Ltd on contact@festive-lights.com. We aim to respond within 2 working days.
Alternatively, contact our help line on (01257) 792111. This service is available between 9.00am – 5.00pm
Monday to Friday.
Mises en garde
1. Utilisation à des fins décoratives uniquement. Tenir hors de la portée des enfants et animaux.
2. Ce produit ne doit pas être immergé dans l'eau ou tout autre liquide ni à proximité d'une source
directe de chaleur. 3. Si votre câble d'alimentation est branché à l'extérieur, assurez-vous l'ensemble
soit totalement étanche et protégé. 4. Si un produit est endommagé, veuillez le jeter et le recycler. Les
LED ne sont pas remplaçables. 5. Toujours consulter Festive Lights pour des questions techniques.
Conserver ce document pour vous y référer si besoin à l'avenir. 6. Si votre installation est très étendue,
nous recommandons d'utiliser un spray imperméabilisant sur toutes les connexions afin de réduire
l'éventualité de tout déclenchement électrique et afin d'éliminer toute erreur humaine. Q20 est le
produit qu'il faut et Festive Lights Ltd le fournit si besoin. 7. Pour toute information technique
concernant ce produit, veuillez contacter Festive Lights Ltd sur contact@festive-lights.com. Nous vous
répondrons sous un délai de 2 jours ouvrés. Vous pouvez aussi nous téléphoner au +44 (0)1257 792111.
Service disponible entre 9h00 et 17h00 du Lundi
au Vendredi.
Warnung
1. Dieses Produkt ist ausschließlich zu Dekozwecken hergestellt. Bitte halten Sie es von Kindern und
Tieren fern. 2. Dieses Produkt kann nicht unter Wasser verwendet werden. Bitte halten Sie es ebenfalls
von jeglicher Art von direkter Hitze fern. 3. Wenn das Starter-Kabel im Auβenbereich angeschlossen
ist, stellen Sie bitte sicher, dass die Steckdose im Auβenbereich vollständig wasserfest ist. 4. Wenn das
Produkt beschädigt wird, ist es dementsprechend zu entsorgen. LED Lichter können nicht ersetzt
werden. 5. Bei technischen Fragen kontaktieren Sie bitte immer Festive Lights Ltd. Bewahren Sie
diese Gebrauchsanweisung sorgfältig auf. 6. Beim Aufbau größerer Lichter-Verknüpfungen im
Außenbereich empfehlen wir ein Spray zur Wetterbeständigkeit an allen Verknüpfungen, um die
Wahrscheinlichkeit einer elektrischen Auslösung zu verringern und menschliches Fehlverhalten
auszuschließen. Q20 ist erhältlich bei Festive Lights Ltd. 7. Bei technischen Fragen zu diesem Produkt
wenden Sie sich bitte an Festive Lights Ltd, contact@festive-lights.com (in englischer/deutscher
Sprache). Wir antworten innerhalb von 2 Werktagen (in englischer/deutscher Sprache). Alternativ
können Sie uns montags bis freitags auch telefonisch unter +44 1257 792111 von 10:00 Uhr – 18:00 Uhr
(deutsche Zeit) erreichen (in englischer Sprache).
Made in China Fabriqué en Chine
festive-lights.com
IP67
Hergestellt in China
In the interest of the safe and proper use of this product, please read these instructions
carefully and retain them for future reference.
General
1. Part of our 240V connectable system, the light strings can only be powered by our
colour select starter cable (MV095B). 2. All products in this range come with weather-
proof, 2 pin connectors, which will connect seamlessly with all accessories within this
1
240V ConnectPro range. 3. Check your power rating label for maximum LED quantity
and power consumption of this product, and do not exceed this maximum number. 4.
Products in this colour select range are manufactured to IP67 standards, ConnectPro
accessories are manufactured to IP65, allowing indoor and outdoor use. 5. Suitable for
commercial use, this high-quality connectable system uses durable rubber cabling, and
innovative bulb sealing technology, meaning these lights are built to withstand
changeable weather conditions and prolonged outdoor use.
Before you start
1. Check the product for any damage or defects before connecting to the electricity
Remove the safety cap
supply. Test all products are working correctly before connecting to an electricity
from product(s)
supply, check that no wires are damaged and water seals (rubber "o" rings) are in place.
(Festive Lights Ltd will not cover any costs related to pre/reinstallation). 2. This product
MUST NOT BE MODIFIED; if any modification is made i.e. cutting / extending lead wires,
2
or using a different power source than supplied, the warranty will be invalidated and
may render the product unsafe. 3. Make sure you connect the power supply to a regular
240V socket, but do not switch on until all connections are complete. 4. Carefully
position cables to avoid a 'tripping' hazard and away from sources of direct heat.
Installation & storage
1. Always connect the power source/starter cable indoors or in a suitable weatherproof
enclosure to ensure a safe connection. 2. Avoid using sharp-edged tools or mounting
accessories (e.g. metal wires) to hang or fasten any part of your system. 3. This product
MUST NOT BE MODIFIED; if any modification is made i.e. cutting extending lead wires,
or using a different power source than supplied, the warranty will be invalidated and
Connect starter cable to
may render the product unsafe. 4. The LED bulbs used are designed for long life and
first product / accessory
are non-replaceable. Do not attempt to repair or replace them.
3 Connect the remote control to a sensor
If the remote control does not automatically connect to the product or to use one
remote to control for multiple sensors: 1. Connect the light strings to the colour select
starter cable (MV095B) and plug in to a power supply. 2. Press and hold the button on
the sensor box. When the string lights flash white press any button on the remote
(apart from OFF) and release the button on the sensor. 3. Press the RESET button to
confirm and pair. 4. Repeat this process to connect the remote control to other sensors.
Please note: The maximum working distance between the sensor and the remote
control is 20m. The remote control can be used on an unlimited number of sensors, but
must be within the maximum range of 20m.
Continue connecting
How to operate with remote control
required lights /
1. ON and OFF
accessories
2. Timer: Press each button once and the LEDs
will flash white to indicate whether the timer
has been activated ON or OFF (8 hours on and
4
16 hours off).
3. For steady ON options press the Red, Green,
Blue, White, Yellow, Sea Blue, Purple or Multi
buttons.
4. +/- Mode: Use these buttons to cycle
through flash, chasing and wave functions in
all colours.
5. Speed Fast and Slow: These work with the
flash white, chasing and wave functions. Speed
fast will function in a faster speed. Speed slow
will function in a slower speed.
Secure end screw cap to
6. Jump: This function is RGB colour changing
finish light chain
flash LED.
7. Flash Multi: This function will flash between
each colour Red, Green, Blue, White, Yellow,
Sea Blue, Purple or Multi.
UK importer: Festive Lights Ltd, Preston Road, Charnock Richard, Chorley, Lancashire, PR7 5HH
EU importer: Festive Lights BV, Utrechtseweg 341, 3818 EL Amersfoort, Netherlands
TIMER TIMER
ON OFF
ON OFF
R G B W
Y SB P M
SPEED SPEED
MODE MODE
_
FAST SLOW
+
FLASH
JUMP AUTO RESET
MULTI
RF wireless remote controller