stoga Mk9 Bedienungsanleitung Seite 4

22.FN+END --- Go to scene mode switch (3 sets of scene mode switch)
23.FN+Space --- into the palette mode
24.FN+DEL --- Enter the lighting custom mode
25.FN+HOME
Backlight recording specific steps are as follows
1、First press FN+DEL key go into gaming backlight
2、then press FN+HOME，Indicator light flash,enter recording mode
3、When recording the led light up,need press FN+→，then click the led
you need light up.(color is different,press1 time: red ,press 2 times :pink,
press 3 times: purple +red;press 4 times: blue; press 5 times: cyan; press 6
times:green; press7 times: yellow,press 8 times:white)
4、Repeat step 3 to set other LED
5、press FN + HOME again to save the recorded lights
6、If you want switch the gaming mode,just need press FN+DEL
MK9 Mechanical keyboard maintenance
The cleaning process should be performed in the off state.Do not use cloth too
wet,so as not to drip into the water.
1.You can wipe the keyboard with a soft, soothing damp cloth. Use a neutral de
tergent or a computer-specific cleaning agent to remove the stains that are diffi
cult to remove. Finally, rinse with a damp cloth and dry.
2. You can be handled with a cotton swab to clean the gap, all cleaning work don
ot use medical alcohol, so as to avoid corrosion of plastic parts.
After the cleaning , wipe the internal water with a rag (paper) and dry naturally in
a ventilated area. Fully dry, and then determine the inside of the keyboard compl
etely dry before testing machine, so as to avoid short circuit caused by damage t
o the host interface.
Other Suggestions :
(1) When the computer is idle, do not forget to do the dustproof measures of the
keyboard.
---Backlight recording mode, backlight can be edited
MK9 Mechanical Keyboard
03