Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
How to use
1.Charging
1) Making the headset on the charging station with the Type C cable included.
2) The Red LED will turn ON when charging, and turn OFF when fully charged.
3) Unplug the Type C cable when fully charged.
Note: Speaker will prompt "Low battery" tune when the battery power is low.
2.Pairing
1) Make sure the headphones and your Bluetooth device are next to each other
(within 3ft / 1m).
2) Press and hold the Power Button for 5 seconds to bring the headphones into pairing
mode with the power / Bluetooth indicator flashing blue and red alternately.
3) Activate Bluetooth on your device and search for nearby Bluetooth connections.
4) Find"E7"in the search results. Tap on the name to connect. Once connected, the LED
indicator will flash blue slowly.
5)Reconnect: Generally, after the first pairing to connect the device, long press for 3
seconds to start the device next time. The headset will enter the backconnect mode
and automatically connect with the last paired device. If you need to connect with other
devices, press the button for 5 seconds to enter the pairing mode, and the device
can be found quickly.
Note:
—The Bluetooth headphones can remember devices paired previously. You may simply
turn on the headphones and the device (with Bluetooth activated), and they will connect
to the last connected device automatically without going into the pairing mode.
—The headphones shut off automatically after 10 minutes when no device is connected.
Werbung
