Herunterladen Diese Seite drucken

RFR-bikeparts TOUR 40 Bedienungsanleitung Seite 3

Led frontleuchte

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

LED-Battery-Front Light Dynamo TOUR 40
Congratulations for having purchased this new device. The manual is part of this
product. It contains important instructions on safety, mounting and disposal.
Before using this product, become acquainted with all the operating and safety in-
structions. Only use this product according to the description and in the indicated
application areas. When passing on this product, please also hand over this manual.
Intended Use
The product is intended for use on bicycles and serves for road illumination. In com-
pliance with currently valid German Road Traffic Licensing Regulations (StVZO), this
LED light kit is approved to be the sole lighting on all bikes.
The light distribution must not be concealed by any other attachments or pieces of
luggage, not even partially. Check the correct setting of your headlight regularly.
The light beam has to point straight ahead in driving direction and must not be
adjusted too high as to not blind oncoming traffic. This product is meant to be used
outdoors. Any other use as previously described or an alteration of the product is
not allowed and can lead to damages on the product.
The manufacturer does not assume any liability for damages as a result of improper
use. The product is not intended for commercial use.
Parts and Control Elements
1. On-/Off-switch
2. Mounting bracket
(optionally with Click-Fix bracket)
3. Adjusting screw
Product Characteristics Headlight Dynamo TOUR 40
LED battery light, up to 40 Lux, switchable between 40 / 15 Lux
Rated output 1 W
Burn time: at 40 Lux approx. 210 mins., at 15 Lux approx. 360 mins.
With integrated lithium-ion batteries, charging time approx. 4 hrs.
Including fixed or removable Click-Fix bracket
Safety Instructions
WARNING! MORTAL DANGER AND ACCIDENT RISK FOR BABIES AND CHILDREN!
Never leave children unattended with the packaging as there is a suffocation risk
by swallowing packaging parts. Always keep the product away from children. The
product is not a toy! This product is not intended to be used by people (including
children) with limited physical, sensory or mental abilites or due to a lack of expe-
rience or knowledge, unless they are being supervised by a person responsible for
their safety. Please note that damages as a result of improper handling, non-com-
pliance with the manual or intervention by unauthorized people are excluded from
the warranty.
Do not take the product apart under any circumstances. Considerable danger can
arise for the user due to improper repairs. Only let repairs be performed by specia-
lists. The LEDs are not exchangeable.
Installation Headlight (Click-Fix-Mounting)
open
close
Attach headlight via steel mounting to the bicycle and pay attention that the head-
light cannot re-adjust itself (Tighten screw firm enough!). Slide the headlight onto
the mount until it audibly engages. For removal, push the locking and slide the
headlight forward from the mount. The light distribution must not be concealed by
an other bicycle part. Pay attention that the light beam always points straight ahead
in driving direction and does not blind other road users!
Adjust Headlight
Attention! Check the correct setting of your headlight regularly. The light beam has
to point straight ahead in driving direction and must not be adjusted too high as to
not blind oncoming traffic.
Loosen the adjusting screw and adjust the headlight so that the light
beam reaches about 10 metres in front of the bike onto the road and does
not blind oncoming traffic (see illustration).
Tighten the adjusting screw firm enough after adjustment so it does not
change by itself.
Handling
Headlight
Turn on the headlight by pressing the switch.
Press once to activate the highest brightness level (40 lux).
Press twice to switch the headlight to 15 lux.
Press again to turn the headlight off.
Battery Charging
Inside the switch is an indicator which lights up red when the battery's charge level
is low and therefore should be recharged.
The battery is charged with a standard micro-USB charger (5 V). There is also the
possibility to charge the headlight via a micro-USB cable at your computer or note-
book.
5V charger
charging at the
notebook
Storage of Lithium-Ion Batteries
Easy battery storage at temperatures from -20° to +45° (less than 1 month)
Easy battery storage at temperatures from 0° to +45° (less than 3 months)
Easy battery storage at temperatures from 0° to +30°
(less than 12 months)
As soon as the batteries were stored for a longer period of time (more than 3 weeks),
they should be fully charged before use.
Cleaning
Clean the LED bicycle light set with a dampish, lint-free cloth.
Note
Never completely immerse the equipment in water. Do not use corrosive or abrasive
cleaners. They will result in damages to the lights.

Werbung

loading