Delk FrostGuard Gebrauchsanweisung

1. Place elastic loop over the driver's side mirror. Our FitFast™
technology ensures the best placement and most snug fit to
your windshield, every time. Chose the FitFast™ loop that
best fits your vehicle. (Fig. 1)
2. Unroll the FrostGuard® as you walk around the front of the
vehicle. It may be necessary to slightly stretch the elastic
loop as you walk in front of the vehicle to attach to the
passenger side mirror. The printed side should be facing out.
(Fig. 2)
3. When you reach the passenger's side mirror, slide the
corresponding elastic loop over the mirror. Lightly tug on
the FrostGuard® to center the unit on the windshield. Check
and smooth the cover to make sure it is lying flat against the
windshield. Extend the wiper blade cover over windshield
wipers for added protection. (Fig. 3)
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Security Feature
4-A. 4-B.
4. Open drivers side door and make sure the
security panel is hanging inside the door
frame, past the door jam. (Fig. 4-A). Close the
drivers side door, making sure the security
panel stays in place. (Fig. 4-B)
IM-52886-52903_R3