Yves Camani YC1060 Bedienungsanleitung Seite 23

Chronograph reset
(Incl. after replacing the battery)
This procedure shoud be performed when the chronograph second hand
does not return to zero position after the chronograph has been reset, and
including after the battery has been replaced.
1. Pull the crown out to the 2nd position.
2. Press button „A" to set the chronograph second hand to the zero position.
The chronograph hand can be advanced rapidly by continuously pressing
button „A".
3. Once the hand have been zeroed, return the crown to the normal position.
* Do not push crown to normal position while the chronograph second hand
returns to zero position.It stops on the way when crown are returned to
normal position and its position is recognized as zero position.
EN
PAGE 23