UltraSecure Ultracom 2 Handbuch Seite 9

7. Upon receiving a call, either icon
gate F or back gate B (in case you have purchased an optional caller unit for back gate). The handset can answer
the call by pressing the blue answer button
Once the call has been answered, the call indicator
Conversation can now be conducted and the voice of visitor can be heard from speaker
visitor, press and hold the PTT button
off. Release PTT button
show up again. It should be worth noting that the voice of your visitor will not be heard while you are pressing the
⑭
PTT button . When you have finished the conversation, press the red hang up button
Note: The UltraCOM has an automatic end call feature. If you do not talk back to visitor (i.e. press the PTT button
⑭
) for over 90 seconds, the call will be ended automatically. Such feature is useful to preserve battery life as well
as protecting your privacy in case you forget to end the call by pressing the red hang up button
8. Once a call has been answered, you can use the door lock open button
gate for visitors (this function is only available if your door has correctly been wired to your UltraCOM 2). Press
⑬
the button shortly, wait for 1-2 seconds and the icon
station door relay has been triggered. The icon
To avoid misuse by children, this door lock opening function can be activated or deactivated. When deactivated,
⑬
pressing the button
• Deactivate door lock opening feature
Under normal operating mode, press shortly the button
⑬
button shortly. The door lock de-activated icon
• Activate door lock opening feature
Perform same procedure as above, the door lock de-activated icon
9. For system equipped with several handsets, all the handsets will be alerted with an incoming call. However, only
the handset which first presses the blue answer button
remaining handsets will return to standby mode and their buttons become deactivated until the conversation
ends, making them impossible to interfere with the conversation.
A B
or icon
⑪
⑭
and speak towards the microphone
⑭
after you have finished speaking to listen to visitor, reception mode icon
M
will have no effect.
appears on the screen, depending if a call is from the front
and the reception mode icon
④
will light up steady and the ding-dong tone stops ringing.
⑬
M
appears on the screen, showing the caller
will disappear after 3 sec.
⑰
, then within a period of 2 seconds, press the
E
will show up on handset screen.
E
will turn off on the handset screen.
⑪
can start the conversation with caller unit. The
8
D
will show up.
⑲
. To talk back to
⑮
, reception mode icon
⑫
to end the call.
⑫
.
to remotely trigger the door latch or
D
goes
D
will