Herunterladen Diese Seite drucken

rock space RSD0608 Schnelle Installationsanleitung

Ac1200 dual band wifi repeater
Verfügbare Sprachen
  • DE

Verfügbare Sprachen

AC1200 Dual Band WiFi Repeater
Model: RSD0608
Button
Use the end of a paper clip or a similar object to press and
hold this button for about 8 seconds with power on, and
RST
then release it to restore the extender to factory settings.
Method 1: Extending Your WiFi Network Using Web UI
1
Power on the Repeater
Plug the repeater into a power outlet
near the router in the same room.
Wait until the PWR LED turns solid blue.
3
Relocate the Repeater
1.
For better performance, plug the repeater into an
outlet halfway between the router and the WiFi
dead zone.
The location you choose must be within the range
of your existing WiFi network.
2.
Wait until the Signal LED turns blue. If not, relocate
the repeater closer to the router.
3.
Connect your WiFi devices to the repeater using the
SSIDs set by yourself, or your router's SSID with a
su x _EXT/5GEXT, and using the WiFi password
same as your WiFi router.
English
Description
2
Extend Your WiFi Network
1
. Connect your WiFi device to the repeater's
WiFi network rockspace_EXT.
WLAN
rockspace_EXT
Ensure that the Mobile Data (if any)
is disabled.
2
. Start a web browser, enter
http://re.rockspace.local or
192.168.0.254 in the address bar to log in.
Create a login password for later attempts
PWR
(recommend).
http://re.rockspace.local
Password (5-32 characters)
Con rm
Next
LED Descriptions
Solid on
Power LED
Blinking
O
On
WPS LED
Blinking
O
Solid blue
Signal LED
Solid red
O
Not Now
WiFi router
The repeater has started.
The repeater is starting.
The repeater is not powered on.
A WPS connection has been established.
A WPS connection is being established.
The WPS function is disabled.
The repeater has connected to your existing WiFi
router/modem, and its position is proper.
The repeater is too far away from the router.
Relocate the repeater closer to the router.
The repeater does not connect to your WiFi router.
3
. Select a WiFi network (SSID) you want to
extend.
Select a WiFi network you want to
extend...
My_home_wi
Rescan
Switch Mode
4
. Enter the password of the WiFi network
you want to extend.
Your existing WiFi network
Enter the password of "My_home_wi "
The extended WiFi network
SSID
My_home_wi _5GEXT
Password of the extended network is
same as your existing WiFi network.
Back
Extend
Wait a moment, the Extended successfully!
page appears.
Antennas upward and vertical to the ground
RSD0608
Signal
Blue: Successful connection
Red: Failed connection
loading

Inhaltszusammenfassung für rock space RSD0608

  • Seite 13: Beschreibung Led Leuchten

    Schnelle Installationsanleitung Der Repeater ist nicht eingeschaltet AC1200 Dual-Band Signal Repeater Eine WPS Verbindung wurde hergestellt Dauerleuchten WPS LED Modell: RSD0608 Blinken Eine WPS Verbindung ist im Aufbau Die WPS-Funktion ist deaktiviert Der Repeater hat eine Verbindung zu Ihrem vorhandenen Blaue WLAN-Router/Modem hergestellt.
  • Seite 14 Antennenrichtung nach oben und senkrecht zum Boden. Um eine bessere Signal Leistung zu erhalten, verbinden Sie den Repeater mit einer Steckdose in der Mitte zwischen dem RSD0608 Router/Modem und der WLAN-Zone ohne Empfang. Der von Ihnen gewählte Standort muss in der Reichweite Ihres Signal vorhandenen WLAN-Netzwerkes liegen.
  • Seite 15 Methode 2: 3. Wenn Sie das Signal in einem mehrstöckigen Haus verwenden möchten, ist die 1. Stellen Sie zunächst sicher, dass Sie mit dem WiFi-Signal verbunden sind (unabhängig Repeater-Antenne nach oben und parallel zum Router ausgerichtet. Wenn es sich vom Router oder Extender), und melden Sie sich dann an der Schnittstelle des Routers an um ein Doppelhaus handelt, sollten sowohl die Antennen des Repeaters als auch 2.