Safety Information - Klaran WS Serie Übersetzung Der Originalanleitung

WS Series Manual
Table of Contents
English
French
German
Italian
Spanish
WS Series
UVC LED Water Treatment System
Original Instructions
Congratulations on the purchase of your
Klaran WS ultraviolet (UV) water treatment
system. This system uses Klaran WD
Series UVC LEDs and is intended for use by
professional installers in Point of Use (POU)
water dispensing systems. The Klaran WS
product has no serviceable parts. The Klaran
WS should not be modified or disassembled
in any way. Doing so may result in damage,
hazardous operation conditions, and
Ultraviolet (UV) light exposure hazards.

Safety Information

3
11
20
28
36
This symbol indicates the operator must read all available
documentation to perform required procedures.
This is the safety alert symbol. Obey all safety messages
that follow this symbol to avoid potential injury. When on the
equipment, refer to the Operational and Maintenance manual
for additional safety.
• The Klaran WS contains microelectronic components
sensitive to shock, moisture, and operation in conditions
beyond stated maximums. Care should be taken in
handling the Klaran WS during shipping, handling,
installation, and operation. The Klaran WS is ESD
(electrostatic discharge) sensitive; static electricity and
surge voltages seriously damage internal components
and can result in product failure.
• Dropping the product may cause damage. Drops from
over 30 cm will cause permanent damage.
3