Renkforce Presenter RF-PRE100 Bedienungsanleitung Seite 3

Operating instructions
Presenter RF-PRE100
Item no. 1574532
Intended use
The product is used to control a computer using via radio.
Thanks to its construction, it is ideal for controlling presentation or multimedia programs. The
integrated laser pointer allows highlighting details in multimedia projections.
The control unit is battery-operated. The USB interface on the connected computer ensures
power is supplied to the USB receiver.
It may only be used in indoor rooms. Contact with moisture, e.g., in bathrooms or the like, must
be avoided.
For safety and approval reasons, you may not convert and/or alter the product in any way. If
you use the product for other purposes than those described above, the product may be dam-
aged. Furthermore, improper use can cause risks such as short-circuits, fire, etc. Please read
the operating instructions carefully and do not discard them. If you pass the product on to a third
party, please hand over these operating instructions as well.
This product complies with the applicable national and European Regulations. All names of
companies and products are the trademarks of the respective owners. All rights reserved.
Package contents
• Presenter
• USB receiver (in battery compartment)
• Batteries (2 x AAA)
• Operating Instructions
Up-to-date operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code. Follow the instructions on the website.
Explanation of symbols
An exclamation mark in a triangle indicates important instructions in this operating
manual that absolutely have to be observed.
The arrow symbol indicates specific tips and advice on operation.
Safety instructions
Please read the operating instructions carefully and pay particular attention
to the safety instructions. We do not assume liability for any injuries/mate-
rial damages resulting from failure to observe the safety instructions and the
information in these operating instructions regarding the proper use of the
product. Furthermore, in such cases, the warranty/guarantee will be null and
void.
a) General information
• The product is not a toy. Keep out of the reach of children and pets.
• Do not carelessly leave packaging material lying about. It may become a danger-
ous plaything for children.
• Protect the product from exposure to humidity, moisture, extreme temperatures,
direct sunlight, strong vibrations and combustible gases, vapours and solvents.
• Please handle the product carefully. It can be damaged by impact, blows, or by
being dropped, even from a low height.
• If safe operation is no longer possible, take the device out of service and secure
it against unintended use. Safe operation is no longer possible, if the product:
- has visible damage,
- no longer functions properly,
- has been stored under adverse ambient conditions for an extended period of
time or
- has been exposed to considerable strain during transport.
• If you have doubts about how the product should be operated or how to safely
connect it, consult a qualified technician.
• If you have any questions that are not answered in these operating instructions,
please contact our technical customer service or another specialist.
b) Care using the laser
• When operating the laser equipment, always make sure that the laser beam is
directed so that no person is in the projection area and that unintentional reflected
beams (e.g. from reflective objects) cannot be directed to areas where people
are present.
• Laser radiation can be dangerous, if the laser beam or a reflection enters the
unprotected eye. Therefore, before using the laser equipment, familiarise yourself
with the statutory regulations and safety instructions for operating such a laser
device.
• Never look into the laser beam and never point it at people or animals. Laser
radiation can cause eye injuries.
• If laser radiation reaches the eyes, the eyes must be closed immediately and the
head has to be moved out of the laser beam.
• Do not point the laser beam at mirrors or other reflective surfaces. The uncon-
trolled, reflected beam may strike people or animals.
• Should your eyes feel irritated from laser radiation, do not perform any safety-
related tasks such as operating machinery, working at high altitudes or close to
high-voltage. Do not drive any vehicles until the irritation has subsided.
• Never open the device. Setting or maintenance tasks must only be executed by a
trained specialist familiar with potential hazards. Improperly executed adjustments
might result in dangerous laser radiation.
• The product is equipped with a class 2 laser. Laser signs in different languages
are included in the package. If the sign on the laser is not written in the language
of your country, please affix the appropriate sign to the laser.
CAUTION LASER RADIATION
DO NOT STARE INTO THE BEAM
CLASS 2 LASER PRODUCT
Output <1mW
Wavelength: 650nm
EN 60 825-1:2014
• Caution: if operation settings or procedures other than those described here in
these instructions are used, this could lead to exposure to dangerous radiation.
c) Battery Instructions
• Batteries should be kept out of the reach of children.
• Do not leave batteries lying around in the open; there is a risk of them being swal-
lowed by children or domestic animals. If they are swallowed, consult a doctor
immediately.
• Leaking or damaged batteries can cause burns if they come into contact with the
skin. You should therefore wear suitable protective gloves.
• Batteries must not be short-circuited, opened or thrown into a fire. There is a
danger of explosion!
• Do not recharge normal, non-rechargeable batteries; there is a risk of explosion!
Only recharge rechargeable batteries that are intended for this purpose; use a
suitable battery charger.
• Never mix batteries of different charge states or different brands.
• Please pay attention to the correct polarity (plus/+ and minus/-) when inserting
the batteries.
Operating controls
1 Laser outlet
2 Button
3 LED indicator
4 „ESC" key
5 Button
2
6 Button
7 Button B
8 ON/OFF Switch
9 Button VOL
10 Laser button
11 Battery compartment
1
3
9
4
5
10
6
7
11
8