Werbung
Utilisation de l'appareil
Indications de mise en service
Veuillez entièrement charger la batterie avant la toute première utilisation. Utilisez le produit avec un clearomiseur avec un filetage 510.
Instructions de nettoyage
Pour nettoyer l'appareil, utilisez un chiffon sec ou un coton-tige.
Chargement de l'appareil
Vous pouvez recharger la batterie en raccordant directement une câble USB à un appareil électrique doté d'un port USB, ou bien utiliser une
fiche de secteur sur une prise de courant. La tension de charge maximale est de 5V. Pendant le chargement, l'indicateur de batterie émet une
lumière rouge. Une fois la batterie complètement chargée, l'indicateur devient bleu. Si vous utilisez un adaptateur mural, assurez-vous qu'il
convient pour recharger avec un courant de 5V.
Remarque : L'indicateur de batterie vous renseigne sur l'état de la charge comme suit :
L'indicateur est éteint : La batterie vient d'être débranchée et est entièrement chargée.
L'indicateur est blanc : Il reste environ 60 ~ 100% de batterie.
L'indicateur est bleu : Il reste environ 20 ~ 60% de batterie.
L'indicateur est rouge : Il reste environ 0 ~ 20% de batterie
L'indicateur clignote 4 fois : La batterie est presque ou entièrement déchargée.
Marche/arrêt
Appuyez 4 fois rapidement sur le bouton fire pour allumer ou éteindre l'appareil. Activez l'appareil en appuyant une fois sur le bouton fire.
Remarque : Si le bouton est actionné sans clearomiseur connecté, aucune tension n'est appliquée et l'affichage clignote 4 fois.
Vapoter
Pendant que vous maintenez enfoncée la touche d'allumage de votre batterie, inhalez la vapeur lentement et en continu via l'embout de
votre clearomiseur. Relâchez le bouton fire pendant que vous expirez la vapeur.
Réglage de la tension de sortie
L'appareil délivre une tension constante à 3 paliers (3.4V, 3.8V, 4.2V). Lors du réglage de
la tension, la puissance (en Watt) est réglée automatiquement fonction de la résistance
de la bobine. Vous pouvez modifier le palier de la tension grâce au plus petit bouton
sous l'affichage de la tension.
Données clés et caractéristiques de performance
Données clés de la batterie J-Easy3
Capacité de la batterie
900 mAh
Tension de sortie
Puissance délivrée à 3 paliers (3,4V | 3,8V | 4,2V)
Tension de charge
DC 5V
Dimensions
71 mm x 18 mm x 24 mm
Type de filetage
510
N'utilisez l'appareil qu'en combinaison avec un clearomiseur adapté, avec filetage 510.
Fonctions de sécurité et de protection
Protection contre les courts-circuits
Si lors de la connexion entre batterie et clearomiseur un court-circuit a lieu, le courant est automatiquement interrompu.
Protection anti-surchauffe | Protection 10 secondes
Si le bouton fire est actionné pendant plus de 10 secondes, l'indicateur de batterie clignote et la fonction de protection désactive le
courant afin de prévenir une surchauffe des composants.
Protection contre la décharge
Avant que la batterie ne soit entièrement déchargée, l'indicateur de batterie clignote et le courant est désactivé.
Protection surcharge
Dès que la batterie est entièrement chargée, la charge est arrêtée afin de prévenir une surcharge.
Protection contre la surtension
Si la tension de charge est plus élevée que nécessaire, la charge est automatiquement désactivée.
Garantie et service après-vente
Conditions de garantie de la société InnoCigs GmbH & Co. KG
Le produit JustFog-que vous avez acheté a été importé pour vous par InnoCigs GmbH & Co.
Si le produit ne fonctionne pas ou présente la moindre défectuosité, veuillez contacter directement le revendeur spécialisé auprès duquel
vous l'avez acheté. Pour toutes questions sur le fonctionnement et l'utilisation de votre appareil, n'hésitez pas à contacter notre service client.
N'utilisez en aucun cas l'appareil en le combinant avec des produits d'autres fabricants, mais uniquement avec des produits JustFog pour
lesquels il est indiqué qu'ils conviennent à cet appareil. Nous vous rappelons expressément que nous déclinons toute responsabilité con-
cernant les dommages survenant à la suite d'une utilisation non-conforme du produit et que, dans ce cas, sa garantie devient caduque.
Contact d'InnoCigs
Contact de votre importateur JustFog officiel
InnoCigs GmbH & Co. KG
Barnerstraße 14c
22765 Hambourg | ALLEMAGNE
Téléphone : +49 (0)40 22 86 729 0
Fax : +49 (0)40 22 86 729 99
E-Mail : service@innocigs.com
J-Easy3 Battery
Information for the User
Thank you for choosing this e-cigarette product from JustFog! We place great value on high quality and safety standards across our entire
range. We hope you enjoy vaping with your new e-cigarette product! Read the operating instructions carefully before use in order to ensure
correct use of the device.
Use only original and/or recommended products in combination with this product. InnoCigs GmbH & Co. KG, as the official importer of this
JustFog product, does not provide any service and/or warranty when non-recommended products are used together with this product.
Should you have questions or need more information about your device, please contact your dealer or visit our website at www.innocigs.com.
Notes & Precautions
Persons under 18 years, pregnant women, nursing mothers and people with cardiovascular disease should not use this product. Not recom-
mended for non-smokers. Please keep out of the reach of children.
This product must not be
This product must not be
used by pregnant or nursing
used by minors.
women.
This product must be kept away
This product complies with EU require-
from children.
ments on technical goods and may be
sold throughout the European Union.
User Instructions
1. If the device has been dropped, please check if any components have come loose, whether there is liquid leakage, or whether there is any
defect on your mouthpiece. If there are no signs of damage upon visual inspection of the product, you can continue using the device. For
hygienic reasons, please wipe the mouthpiece with a cloth before reusing.
2. The device should not be used if there are cracks or deformations in the material or a defective part needs to be replaced. Never attempt to
repair the device on your own if a defect occurs.
3. The device should not be used when the e-liquid in the clearomizer tank is empty or almost empty. The same applies if you experience a
change in the taste. Please fill the Clearomizer tank with fresh e-liquid and replace the head before you continue to use the e-cigarette.
Because atomizer heads are wearing parts, they must be changed regularly.
4. Never store the device in rooms with extremely high temperatures or in rooms with extremely high humidity. Avoid long periods of direct
sunlight.
5. The recommended temperature range for charging is 5°C to 45°C and for using the device is -10°C to 60°C.
6. If e-liquid comes in contact with your skin, wipe it off as soon as possible and wash the area of contact.
7. If e-liquid is swallowed, contact your local poison control center. The Poison Emergency Hotline of the Charité University Hospital Berlin can
be reached day and night by phone at +49 (0)30 - 19 240. In Austria, you can reach the 24h hotline of the Vienna Poison Information Center
by phone at +43 (0)1 - 406 43 43. In France, please contact one of the local poison control centers. In case of emergency, immediately contact
local emergency officials.
8. Nicotine can increase the heart rate and/or blood pressure. Nicotine can cause nausea, dizziness and/or stomach pain. If you notice any
undesirable side effects, discontinue use and consult a physician.
9. Please comply with all local laws when using this e-cigarette product.
10. The product must not be placed in the hands of children or adolescents.
Warning
This e-cigarette product can be used with nicotine-containing e-liquid. Nicotine is a highly addictive substance.
3.4V
3.8V
4.2V
3.4V
English
Electronic goods and batteries should not be disposed with
normal household waste! Please dispose of used electronic
goods and batteries – as required by law – at a municipal collec-
tion location, so that raw materials and potentially harmful
substances can be properly removed and recycled.
General Information about Puffing Techniques while Vaping
When vaping, a distinction is made between two puffing techniques:
Moderate Vaping (Mouth-to-Lung)
The vapor from an e-cigarette is first collected in the oral cavity for the entire duration of the puff and then inhaled into the lungs. This puffing
technique is referred to as moderate, mouth-to-lung vaping and is similar to smoking. To achieve this, there must be a noticeable resistance
when puffing on the e-cigarette. Evaporator heads that support this puffing technique in the moderate range (resistance usually > 1 ohm) are
often referred to as MTL (mouth to lung) heads. (Other abbreviations include ML and M2L)
Sub-Ohm Vaping (Direct Lung Inhalation)
While puffing, the vapor of an e-cigarette is directly inhaled into the lungs. This puffing technique is referred to as sub-ohm vaping with direct lung
inhalation. To achieve this, there must be low puffing resistance and a strong air supply to the evaporator head. Both have a positive effect on pro-
ducing large quantities of vapor. Evaporator heads that support this puffing technique in the sub-ohm range (resistance usually < 1 ohm) are often
referred to as DL (direct lung) heads. (other abbreviations include DTL and D2L)
Contents | Design of the Device
1 x J-Easy3 Battery
1x User Manual
Using the Device
Notes on Using the Device for the First Time
Please charge the battery fully before using it for the first time. Use the product with a clearomizer with a 510 gage thread.
Tips for Cleaning
Use a dry cloth or cotton swab to clean the device.
Charging the Device
You can charge the battery directly via a USB cable using an electric device with a USB port or you can use a suitable wall outlet for charging with
an electrical socket. The maximum charging voltage is 5 V. The battery indicator lights up red during the charging process. Once the battery is
fully charged, it will light up blue.[3] When using a wall adapter, make sure that it is suitable for charging with a charging voltage of 5 V.
Note: The battery indicator displays the current battery status for you:
Battery indicator is off: The battery is fully charged right after the charging process.
Battery indicator is lit up white: The battery still has 60 to 100% of its charge left.
Battery indicator is lit up blue: The battery still has 20 to 60% of its charge left.
Battery indicator is lit up red: The battery still has 0 to 20% of its charge left
Battery indicator blinks four times: Little to no charge is left on the battery.
Power On/Off
Push the Fire button four times quickly in succession in order to turn the device on or off. Activate the device by pushing the Fire button one time.
Note: If the button is pushed when the clearomizer is not connected, no voltage will be emitted and the display will blink four times.
Vaping
While holding the fire button of your e-cigarette, inhale the vapor slowly and continuously through the mouthpiece of your clearomizer.
Release the Fire button when exhaling the vapors.
Adjusting the Output Voltage
The device will deliver constant voltage in three adjustable levels (3.4 V, 3.8 V, 4.2 V).
When the voltage is set, the power (wattage) is automatically set to correspond to the
resistance value of the spool. You can switch between the levels in steps using the
smaller button below the voltage level display.
Key Features & Performance
J-Easy3 Battery Key Features
Battery capacity
900 mAh
Output voltage
Most constant output in three levels (3.4V | 3.8V | 4.2V)
Charging voltage
DC 5V
Dimensions
71 mm x 18 mm x 24 mm
Thread type
510
Only use the device in combination with a suitable clearomizer with a 510 gage thread.
Safety & Protective Functions
Short-Circuit Protection
If there is a short circuit when the battery and clearomizer are connected, the power output is automatically ended.
Overheating Protection | 10 Second Protection
If the Fire button is held down longer than 10 seconds, the battery indicator will blink and the protective function will turn off the power
output in order to keep the components from overheating.
Protection Against Total Loss of Charge
Before the battery loses all of its charge, the battery indicator will blink and power output will be deactivated.
Overcharging Protection
As soon as the battery is fully loaded, it will stop charging in order to prevent overcharging.
Surge Protection
If the charging voltage is higher than necessary, charging will be automatically terminated.
Warranty & Service
Warranty Terms of the InnoCigs GmbH & Co. KG
The JustFog product you have just purchased was imported for you by InnoCigs GmbH & Co. KG. If the product ceases functioning or is defective
in any way, please contact the specialist retailer where you purchased the product. Please feel free to contact our customer service department
with any questions concerning operation and use of the device.
Please do not use products from other manufacturers in combination with your device and only use products that are marked as suitable for use
with JustFog products. We expressly point out that we cannot accept liability for damages that occur if the product is used improperly, and that
in such a case the product warranty will be void.
Contact to InnoCigs
Contact your official JustFog importer
InnoCigs GmbH & Co. KG
Barnerstraße 14c
22765 Hamburg | GERMANY
Phone: +49 (0) 40 – 22 86 729 0
Fax: +49 (0) 40 – 22 86 729 99
E-Mail: service@innocigs.com
Battery indicator
Fire button
Voltage level display
Button to configure the voltage level
Micro USB port
3.4V
3.8V
4.2V
3.4V
Werbung
